Read Sony KF-42WE610K / KF-50WE610K / KF-60WE610K Service Manual online
– 8 –
KF-42WE610K/50WE610K/60WE610K
K
RM-Y913K
RM-Y913K
RM-Y913K
- The results display is not automatically cleared. In case of repairs and after repairs, check
the self-diagnosis screen and be sure to return the results display to "0".
- If the results display is not returned to "0" it will not be possible to judge a new malfunction
after completing repairs.
<Method of Clearing Results Display>
1. Power off (Set to the standby mode)
2.
Channel
3. Channel
<Method of Ending Self-Diagnosis Screen>
- When ending the self-diagnosis screen completely, turn the power switch OFF on the
remote commander or the main unit.
5. Self-Diagnosis function operation
-
3 : Lamp cover
When lamp cover SW is opened then pin 3 of CN8014 on the A
board is high, LCD Engine u-com (pin 27 of IC3208 on the C2
board) detects it and make turn off the lamp.
board is high, LCD Engine u-com (pin 27 of IC3208 on the C2
board) detects it and make turn off the lamp.
-
4 : Fan
When Fan1 or Fan2 or Fan3 is stopped then pin 2 or 5 or 8 of
CN8022 on the A board is high, LCD Engine u-com (pin 24 of
IC3208 on the C2 board) detects it and make turn off the lamp.
CN8022 on the A board is high, LCD Engine u-com (pin 24 of
IC3208 on the C2 board) detects it and make turn off the lamp.
-
4 : Temp
When a temperature sensor on the H3 board detects a high
temperature or IIC-E line connector (CN8023:A board,CN44:H3
board) is not attached securely, LCD Engine u-com IIC-E line
detects it and make turn off the lamp.
temperature or IIC-E line connector (CN8023:A board,CN44:H3
board) is not attached securely, LCD Engine u-com IIC-E line
detects it and make turn off the lamp.
-
5 : Lamp driver
When lamp is not turned on then pin 29 of LCD Engine u-com
(IC3208 on the C2 board) is high, checks pin 28 of LCD Engine
u-com. If pin 28 is low, it is judged no high voltage.
(IC3208 on the C2 board) is high, checks pin 28 of LCD Engine
u-com. If pin 28 is low, it is judged no high voltage.
-
6 : +B OVP
When +17V line drop then pin 53 of MAIN u-com (IC3405 on the
C2 board) is low, it turns off the main power.
C2 board) is low, it turns off the main power.
-
7 : Audio
When DC is appeared by audio amp failure at speaker line.
Then it is detected by MAIN u-com (pin 59 of IC3405 on the C2
board) and it turns off the main power.
Then it is detected by MAIN u-com (pin 59 of IC3405 on the C2
board) and it turns off the main power.
-
8 : D-OVP
When +3.3V or +2.5V or +1.8V line over then pin 49 of MAIN
u-com (IC3405 on the C2 board) is low, it turns off the main
power.
u-com (IC3405 on the C2 board) is low, it turns off the main
power.
-
LAMP : Lamp
When lamp is not turned on then pin 29 of LCD Engine u-com
(IC3208 on the C2 board) is high, checks pin 28 of LCD Engine
u-com. If pin 28 is high, it is judged lamp is burned out.
(IC3208 on the C2 board) is high, checks pin 28 of LCD Engine
u-com. If pin 28 is high, it is judged lamp is burned out.
5
-
8
4. Wait until appearing the initial setup display.
5. Disconnect AC plug and connect it again.
1
Click on the first or last page to see other KF-42WE610K / KF-50WE610K / KF-60WE610K service manuals if exist.