KDS-55A2000 - Sony TV Service Manual (repair manual). Page 12

Read Sony KDS-55A2000 Service Manual online

– 11 –
KDS-55A2000
RM-ED006
9
 GB
Start-up Guide
3
When the Programme Sorting menu 
appears on the screen, follow the steps of 
“Programme Sorting” (page 36).
If you do not change the order in which the analogue 
channels are stored on the TV, go to step 4.
4
Press MENU to exit.
The TV has now tuned in all the available channels.
Note
When a digital broadcast channel cannot be received, or 
when selecting a region in which there are no digital 
broadcasts in step 4 (page 8) under “4: Selecting the 
language and country/region”, the time must be set after 
performing step 3.
10
 GB
Safety information
Mains lead
• Observe the followings to prevent the mains lead being 
damaged. If the mains lead is damaged, it may result in a 
fire or an electric shock.
– When you disconnect 
the mains lead, 
disconnect it from the 
mains socket first.
– Be sure to grasp the 
plug when disconnecting the 
mains lead. Do not pull on the 
mains lead itself.
– Do not pinch, bend, or twist the 
mains lead excessively. The core 
conductors may be exposed or broken. 
– Do not modify the mains lead. 
– Do not put anything heavy on the 
mains lead.
– Keep the mains lead away from heat 
sources.
• If you damage the mains lead, stop 
using it and ask your dealer or Sony service centre to 
exchange it.
• Do not use the supplied mains lead on any other 
equipment.
• Use only an original Sony mains lead, not other brands.
Mains socket
• The TV set with a three-wire grounding 
type mains plug must be connected to a 
mains socket with a protective earthing 
connection.
• Do not use a poor fitting mains socket. 
Insert the plug fully into the mains socket. 
A poor fit may cause arcing and result in a 
fire. Contact your electrician to have the 
mains socket changed.
Cleaning the mains plug
Unplug the mains plug and clean it 
regularly. If the plug is covered with dust 
and it picks up moisture, its insulation may 
deteriorate and result in a fire.
Overloading
This TV set is designed to operate on 
a 220–240 V AC supply only. Take 
care not to connect too many 
appliances to the same mains socket 
as this could result in a fire or an electric shock.
When not in use
• If you will not be using the TV 
set for several days, the TV set 
should be disconnected from 
the mains for environmental 
and safety reasons. 
• The TV set is not disconnected from the mains when the 
TV set is switched off. To disconnect the TV set 
completely, pull the plug from the mains. However, some 
TV sets may have features which need the TV set to be left 
in standby to work correctly. The instructions in this 
manual will inform you if this applies.
Carrying
• Before carrying the TV set, disconnect all the cables from 
the TV set.
• Carrying the large size TV set requires two or more 
people.
• When you carry the TV set 
by hand, hold the TV set as 
illustrated on the right. 
When lifting the TV set or 
moving the panel of the TV 
set, hold it firmly from the 
bottom. If you do not do so, 
the TV set may fall and be 
damaged or cause serious 
injury.
• When transporting it, do not 
subject the TV set to jolts or 
excessive vibration. The TV 
set may fall and be damaged or cause serious injury.
• If the TV set has been dropped or damaged, have it 
checked immediately by qualified service personnel.
• When you carry the TV set in for repair or when you move 
it, pack it using the original carton and packing material.
Placement
• The TV set should be installed near an easily accessible 
mains socket.
• Place the TV set on a stable, level surface. 
Do not hang anything on the TV set. If 
you do, the TV set may fall from the 
stand, causing damage or serious injury.
• Do not install the TV set in places subject 
to extreme temperature, for example in 
direct sunlight, or near a radiator, or heating vent. If the 
TV set is exposed to extreme temperature, the TV set may 
overheat and cause deformation of the casing or cause the 
TV set to malfunction.
• Do not install the TV set in a place exposed to direct air 
conditioning. If the TV set is installed in such a location, 
moisture may condense inside and may cause a 
malfunction.
• Never place the TV set in hot, oily, 
humid or excessively dusty places. 
• Do not install the TV set where 
insects may enter.
• Do not install the TV set where it 
may be exposed to mechanical vibration.
• Do not install the TV set in a location where it may 
protrude, such as on or behind a pillar, or where you might 
bump your head on it. Otherwise, it may result in injury.
• Do not allow children to climb on the TV 
set.
• If you use the TV set near the seashore, 
salt may corrode metal parts of the TV set 
and cause internal damage or fire.
Page of 127
Display

Click on the first or last page to see other KDS-55A2000 service manuals if exist.