KDL-52X2000 (serv.man2) - Sony TV Service Manual (repair manual). Page 12

You can select the options listed below on the Sound 
menu. To select options in “Settings”, refer to “Picture 
menu” (page 24).

For the input currently being viewed, select whether to use the common setting or to 
set each item separately.
“Common”: Applies common settings whose adjustments are shared with other 
inputs in which “Target Inputs” is set to “Common”. 
Current input name (e.g. AV1): Allows you to set each option separately for the 
current input.

Set each input to “Common” if you require the same settings to apply to each input.

Selects the sound mode.
“Dynamic”: Enhances treble and bass.
“Standard”: For standard sound. Recommended for home entertainment.
“Custom”: Flat response. Also allows you to store your preferred settings.

Resets all the “Sound” settings except “Target Inputs”, “Sound Mode” and “Dual 
Sound” to the factory settings.

Adjusts higher-pitched sounds.

Adjusts lower-pitched sounds.

Emphasizes left or right speaker balance.

Keeps a constant volume level even when volume level gaps occur (e.g. adverts tend 
to be louder than programmes).

Adjusts the volume level of the current input relative to other inputs, when “Target 
Inputs” is set to the current input name (e.g. AV1).

Selects the surround mode.
“Dolby Virtual”: Uses the TV speakers to simulate the surround effect produced by 
a multi channel system.
“Off”: For normal stereo or mono reception.

Gives sound more impact by compensating for phase effects in speakers using the 
“BBE High Definition Sound System”.

You can select the options listed below on the Screen 
menu. To select options in “Settings”, refer to “Picture 
menu” (page 24).

For the input currently being viewed, select whether to use the common setting or to 
set each item separately.
“Common”: Applies common settings whose adjustments are shared with other 
inputs in which “Target Inputs” is set to “Common”. 
Current input name (e.g. AV1): Allows you to set each option separately for the 
current input.

Set each input to “Common” if you require the same settings to apply to each input.

For details about the screen format, see “To change the screen format manually to 
suit the broadcast” (page 17).

Automatically changes the screen format according to the broadcast signal. To keep 
your setting, select “Off”.

Even if “Auto Format” is set to “On” or “Off”, you can always modify the format of the screen 
by pressing 

 repeatedly.

Selects the default screen mode for use with 4:3 broadcasts.
“Smart”: Displays conventional 4:3 broadcasts with an imitation wide screen effect.
“4:3”: Displays conventional 4:3 broadcasts in the correct proportions.
“Off”: Keeps the current “Screen Format” setting when the channel or input is 
changed.

This option is available only if “Auto Format” is set to “On”.

Adjusts the screen area displaying the picture.
“Full Pixel”: Displays the picture for 1080i or 1080p sources in the original size 
when parts of the picture are cut off.
“Normal”: Displays the picture in the original size.
“-1”/“-2”: Enlarges the picture to hide the edge of the picture.

Adjusts the horizontal position of the picture.

This option is not available when “Display Area” is set to “Full Pixel”.