Read Sony KDL-46XBR10 / KDL-52XBR10 Service Manual online
KDL-46/52XBR10 (UC) 9
SELF-DIAGNOSTIC SCREEN DISPLAY
For errors with symptoms such as “power sometimes shuts off” or “screen sometimes goes out” that cannot be confi rmed, it is possible to
bring up past occurrences of failure for confi rmation on the screen:
bring up past occurrences of failure for confi rmation on the screen:
[Viewing the Self Diagnostic List]
In standby mode, press buttons on the remote commander sequentially in rapid succession as shown below:
Since the diagnostic results displayed on the screen are not automatically cleared, always check the self-diagnostic screen
After you have completed the repairs, clear the result display to “0”.
After you have completed the repairs, clear the result display to “0”.
Exiting the Self-diagnostic screen
To exit the Self Diagnostic screen, turn off the power to the TV by pressing the POWER button on the remote or the POWER button on
the TV.
the TV.
SELF DIAG
DC ALERT
003
0
SELF DIAG
ET I 1
0
[ SCREEN DISPLAY (Monitor) ]
[ SCREEN DISPLAY (Media receiver) ]
Push the [JUMP] key
Push the [1] key
Push the [4] key
Push the [JUMP] key
Push the
[JUMP] key
[JUMP] key
5
* : Note that this differs from entering the service mode (volume +)
*
DISPLAY
TV POWER
Channel
Volume
Clearing the Self Check Diagnostic List
1. In Service Mode, press the Channel 8 Channel 0 .
1. In Service Mode, press the Channel 8 Channel 0 .
Click on the first or last page to see other KDL-46XBR10 / KDL-52XBR10 service manuals if exist.