Read Sony KDL-46V4100 Service Manual online
17
KDL-46V4100
KDL-46V4100
1 Slide out Speaker (L) unit from Bezel
2 Slide out Speaker (R) unit from Bezel
3 Remove 2 screws from Under Bar
4 Disconnect 1 connector and Slide out H3E Board from
Clear Panel
5 Release hooks and remove from Bezel
6 Remove 1 screw and release hooks from Clear Panel
7 Disconnect 1 connector and Slide out H4 Board from
Light Guide
1-8
SPEAKERS, UNDER BAR, H4 BOARD AND LIGHT GUIDE REMOVAL
Bezel
LCD Panel
1
2
Speaker Unit (L)
Speaker Unit (R)
Light Guide
Under Bar
H3E Board
Bezel
Clear Panel
1
3
2
5
4
6
7
1-9. LCD
PANEL
REMOVAL
NOTE: The LVDS cable can only be installed one way. There is colored tape on the cable to determine which side is attached
to the TCON and which side is attached to the BU Board. Refer to Wire Dressing Illustration on Page 32.
1 Disconnect 2 connectors
2 Remove 2 screws
1-9-1. CLEANING THE LCD PANEL
CAUTION: When cleaning the TV, be sure to unplug the power cord
to avoid any chance of electric shock.
1 Clean the cabinet of the TV with a dry soft cloth.
2 Wipe the LCD screen gently with a soft cloth.
Stubborn stains may be removed with a cloth slightly moistened with a solution of mild soap and warm water.
If using a chemically pretreated cloth, please follow the instruction provided on the package.
Never use strong solvents such as a thinner, alcohol or benzine for cleaning.
Periodic vacuuming of the ventilation openings is recommended to ensure to proper ventilation.
If using a chemically pretreated cloth, please follow the instruction provided on the package.
Never use strong solvents such as a thinner, alcohol or benzine for cleaning.
Periodic vacuuming of the ventilation openings is recommended to ensure to proper ventilation.
☛
Click on the first or last page to see other KDL-46V4100 service manuals if exist.