Read Sony KDL-46NX810 / KDL-55NX810 / KDL-60NX810 Service Manual online
KDL-46NX810/55NX810/55NX811/60NX810
32
SERVICE ADJUSTMENTS
2-2-5. VERIFYING THE EMITTER OUTPUT LEVEL
If necessary, the emitter LED output level can be increased or decreased.
25. Press
2
until the
009 3D category displays.
PEM
SERVICE
009
000
EMIT_STR
3D
0
Default
Data Value
26. Using the table below, press
3
to increase or press
6
to
decrease the data value.
DATA VALUE
SETTING
0
Strong (Default)
1
Weak
27. Press
MUTING then press
0
to WRITE (Save) the changes.
28. Exit Service Mode by turing the TV Power Off.
29. Proceed to “Verifying the Model and Panel Information”.
2-2-6. VERIFYING THE MODEL AND PANEL INFORMATION
After saving the changes to the service data, verify the information.
1. TV must be in standby mode. (Power off).
2. Access Service Mode.
Press the following buttons on the Remote Commander
within a second of each other:
DISPLAY
Channel
5
Volume
+
POWER
3. Display the
DIGITAL Service Menu.
NOTE: There are 3 Service Menus for this model, DIGITAL,
CHASSIS, and SUB. If the DIGITAL Service Menu is
not displayed, press
JUMP or OPTIONS on the Remote
Commander.
DIGITAL
SERVICE
001 OP
000 VERS
---
<MAIN>
<SUB>
DM1.301J00AA
SM1.010W00AA
M2.105C
SB1.000W00AA
DD1.016J00AA
SD1.010W00AA
(DM1.3 01J00AA)
RF01.05
WP00.521J00AA
ID1C117081
ID 86d731ae
PID0caa0000
WF:2.0.0.99
<BEM>
WF:0B
BM1.012W00LU
Camera FW
BB1.000W00LU
Camera FW
BD1.011J46LUX
---.---------
xxxxxxxxxxxxxx
Model ID
Product ID
Click on the first or last page to see other KDL-46NX810 / KDL-55NX810 / KDL-60NX810 service manuals if exist.