Read Sony KDL-46NX810 / KDL-55NX810 / KDL-60NX810 Service Manual online
KDL-46NX810/55NX810/55NX811/60NX810
28
SERVICE ADJUSTMENTS
2-2-3. SELECTING THE DESTINATION
After replacing the BUHT Board or the LCD Panel Assembly, the
destination location must be set.
CAUTION: Verify the DESTINATION is set correctly before
proceeding to the next step. If another destination Data
Value is selected, it may possibly corrupt the software which
would require a BUHT Board replacement.
DIGITAL
SERVICE
002 MODEL
000 SEG
21: 2a-1.5
7. Press
1
to move to “
001 DEST” sub Category.
DIGITAL
SERVICE
002 MODEL
001 DEST
03: UC (UC grp)
8. Using the table, press
3
to increase the data value or
6
to decrease the data value, to select the destination of the
TV.
GROUP
DESTINATION
CODE
DATA
VALUE
DESTINATION
UC
3
US/CND
LTN-D
16
MX/
LATIN AMERICA
UC grp
DIGITAL
SERVICE
002 MODEL
001 DEST
03: UC (UC grp)
Data Value
Destination
9. After verifying the destination data value displays,
press
0
to WRITE (Save) the changes.
10. Proceed to “Resetting the Data Value in the Panel Engine
Micro”.
2-2-4. RESETTING THE DATA VALUE IN THE PANEL ENGINE
MICRO
For the models listed in this manual, the Panel Engine Micro must be reset
whenever the BUHT Board, the LCD Panel, the TCON board, or the driver
board is replaced.
11. Press
JUMP or OPTIONS on the Remote Commander until
the
PEM Service Menu displays.
PEM
SERVICE
000 VERSION
MAIN
BOOT
DATA
NLD
NLD DATA
QDL NVM
33
LD1.00
37
1.0018W00LA
1.002W00LA
1.017WA46LF
Click on the first or last page to see other KDL-46NX810 / KDL-55NX810 / KDL-60NX810 service manuals if exist.