Read Sony KDL-46NX810 / KDL-55NX810 / KDL-60NX810 Service Manual online
KDL-46NX810/55NX810/55NX811/60NX810
17
DISASSEMBLY/PART NUMBER INFORMATION
NOTE: Les composants identifies per un trame et
une marque
!
sont critiques pour la securite.
Ne les remplacer que par une piece portant le
numero specifie.
NOTE: The components identified by shading
and
!
mark are critical for safety. Replace only
with part number specified.
NOTE: The components identified by a red outline and a mark contain
confidential information. Specific instructions must be adhered to whenever
these components are repaired and/or replaced.
See Appendix A: Encryption Key Components in the back of this manual.
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
157
A-1788-127-A
BUHT BOARD, COMPLETE
AFTER REPLACING THE MAIN BOARD OR THE LCD PANEL, YOU
MUST UPDATE THE SOFTWARE TO THE LATEST VERSION AND
COMPLETE ANY SERVICE ADJUSTMENTS.
158
4-188-665-11
BRACKET, SIDE JACK
159
4-188-666-11
BRACKET, TERMINAL
160
1-474-254-11
G10 BOARD, COMPLETE
161
4-193-111-01
SHEET, INSULATION (G60)
162
1-474-255-11
G11 BOARD, COMPLETE
163
4-188-691-01
SHEET, INSULATION (GS)
2-990-421-41
SCREW (+PSW) (M3X6)
F
E
D
G
H
K
I
J
C
B
A
L
M
157
156
155
158
159
161
160
154
153
152
151
162
163
151
NA
P-MOD/T-MOD (LCD PANEL ASSEMLY)
FOR ALL P-MOD/T-MOD (LCD PANEL ASSEMLY) PART NUMBER
INFORMATION REFER TO THE LCD PANELS SERVICE MANUAL
152
4-199-302-01
LABEL, TERMINAL (FOR US)
153
4-199-290-01
LABEL, SIDE JACK (L)
154
1-487-819-11
CARD, WIRELESS LAN
155
A-1782-538-A
HLT(STD), BOARD MOUNTED
156
4-195-059-01
TAPE, PWB (H)
Check the
Sony Electronics Service Information
website for any additional service related issues for this model.
1-3-2. KDL-60NX810 ONLY
CAUTION: Refer to
”Special Handling Instructions When Replacing the LCD Panel Assembly” on page 6.
A Gently peel-off Terminal Label to detach from LCD Panel Assembly
B Gently peel-off Side Jack Label to detach from LCD Panel Assembly
B Gently peel-off Side Jack Label to detach from LCD Panel Assembly
C Remove 2 screws from Wireless LAN Card to detach from LCD Panel Assembly
D Gently peel-off HLT Board and Disconnect 1 connector to detach from LCD Panel Assembly
D Gently peel-off HLT Board and Disconnect 1 connector to detach from LCD Panel Assembly
E Gently peel-off Tape PWB (H) to detach from HLT Board
F Remove 9 screws from BUHT Board to detach from LCD Panel Assembly
G Release 2 clips to detach Side Jack Bracket from BUHT Board
H Release 2 clips to detach Terminal Bracket from BUHT Board
I Slide-out 2 Attachment GL pieces to detach from LCD Panel Assembly
J Remove 3 screws from G10 Board to detach from LCD Panel Assembly
K Gently peel-off Insulation Sheet (G60) to detach from LCD Panel Assembly
L Remove 1 screw from G11 Board to detach from LCD Panel Assembly
M Gently peel-off Insulation Sheet (GS) to detach from LCD Panel Assembly
Note: The Tape PWB (H), Side Jack Label, Terminal Label,
Insulation Sheet (G60), Insulation Sheet (GS) and
Attachment GL pieces are not included with the
LCD Panel Assembly and must be replaced
when replacing the LCD Panel Assembly.
Click on the first or last page to see other KDL-46NX810 / KDL-55NX810 / KDL-60NX810 service manuals if exist.