Read Sony KDL-46NX810 / KDL-55NX810 / KDL-60NX810 Service Manual online
KDL-46NX810/55NX810/55NX811/60NX810
16
DISASSEMBLY/PART NUMBER INFORMATION
NOTE: Les composants identifies per un trame et
une marque
!
sont critiques pour la securite.
Ne les remplacer que par une piece portant le
numero specifie.
NOTE: The components identified by shading
and
!
mark are critical for safety. Replace only
with part number specified.
NOTE: The components identified by a red outline and a mark contain
confidential information. Specific instructions must be adhered to whenever
these components are repaired and/or replaced.
See Appendix A: Encryption Key Components in the back of this manual.
1-3. G9/G10/G11 (POWER) BOARDS, BUHT (MAIN) BOARD, HLT BOARD,
WIRELESS LAN CARD AND LCD PANEL ASSEMBLY REMOVAL
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
107
A-1788-127-A
BUHT BOARD, COMPLETE
AFTER REPLACING THE MAIN BOARD OR THE LCD PANEL, YOU
MUST UPDATE THE SOFTWARE TO THE LATEST VERSION AND
COMPLETE ANY SERVICE ADJUSTMENTS.
108
4-188-665-11
BRACKET, SIDE JACK
109
4-188-666-11
BRACKET, TERMINAL
110
1-474-257-11
G9 BOARD, COMPLETE
(KDL-46NX810/55NX810/55NX811 ONLY)
111
4-188-690-01
SHEET, INSULATION (G)
(KDL-46NX810/55NX810/55NX811 ONLY)
2-990-421-41
SCREW (+PSW) (M3X6)
1-3-1. KDL-46NX810/55NX810/55NX811 ONLY
CAUTION: Refer to
”Special Handling Instructions When Replacing the LCD Panel Assembly” on page 6.
Note: The Tape PWB (H), Side Jack Label, Terminal Label, Insulation Sheet (G) and Attachment GL pieces
are not included with the LCD Panel Assembly and must be replaced when replacing the LCD Panel
Assembly.
A Remove 2 screws from Wireless LAN Card to detach from LCD Panel Assembly
B Gently peel-off HLT Board and Disconnect 1 connector to detach from LCD Panel Assembly
B Gently peel-off HLT Board and Disconnect 1 connector to detach from LCD Panel Assembly
C Gently peel-off Tape PWB (H) to detach from HLT Board
D Remove 9 screws from BUHT Board to detach
D Remove 9 screws from BUHT Board to detach
from LCD Panel Assembly
E Release 2 clips to detach Side Jack Bracket
from BUHT Board
F Release 2 clips to detach Terminal Bracket from
BUHT Board
G Remove 3 screws from G9 Board to detach
from LCD Panel Assembly
H Gently peel-off Insulation Sheet (G)
to detach from LCD Panel Assembly
I Slide-out 2 Attachment GL pieces
to detach from LCD Panel Assembly
107
106
105
108
109
111
110
104
103
102
101
101
NA
P-MOD/T-MOD (LCD PANEL ASSEMLY)
FOR ALL P-MOD/T-MOD (LCD PANEL ASSEMLY) PART NUMBER
INFORMATION REFER TO THE LCD PANELS SERVICE MANUAL
102
4-199-302-01
LABEL, TERMINAL (FOR US)
(KDL-46NX810/55NX810/60NX810 ONLY)
102
4-199-303-01
LABEL, TERMINAL (FOR LA/MX)
(KDL-55NX811 ONLY)
103
4-199-290-01
LABEL, SIDE JACK (L)
104
1-487-819-11
CARD, WIRELESS LAN
105
A-1782-538-A
HLT(STD), BOARD MOUNTED
106
4-195-059-01
TAPE, PWB (H)
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
Check the
Sony Electronics Service Information
website for any additional service related issues for this model.
D
C
B
E
F
H
I
G
A
THE TERMINAL LABEL
IS NOT INCLUDED
WITH THE REPLACEMENT PANEL.
THE SIDE JACK LABEL
IS NOT INCLUDED
WITH THE REPLACEMENT PANEL.
Click on the first or last page to see other KDL-46NX810 / KDL-55NX810 / KDL-60NX810 service manuals if exist.