Read Sony KDL-46HX850 / KDL-55HX850 Service Manual online
KDL-46HX850/55HX850 42
SECTION 5 - UPDATES AND ADJUSTMENTS
CLEARING THE SELF DIAGNOSIS SELF CHECK
INFORMATION
After resetting the panel operation time, clear the Self Check screen.
6. To clear the error history and error count
press
8
0
.
SELF CHECK
000 RESERVED
--------------------- --------------------- --------------------- 00
000 RESERVED
--------------------- --------------------- --------------------- 00
002 MAIN_POWE --------------------- --------------------- --------------------- 00
003 DC_ALERT
003 DC_ALERT
--------------------- --------------------- --------------------- 00
003 AUD_PROT
--------------------- --------------------- --------------------- 00
003 HDMI_EQ
--------------------- --------------------- --------------------- 00
003 TU_DEMOD --------------------- --------------------- --------------------- 00
004 VLED
004 VLED
--------------------- --------------------- --------------------- 00
004 LD_ERR
--------------------- --------------------- --------------------- 00
005 HFR_ERR
--------------------- --------------------- --------------------- 00
005 TCON_ERR
--------------------- --------------------- --------------------- 00
005 P_ID-ERR
--------------------- --------------------- --------------------- 00
006 BACKLITE
--------------------- --------------------- --------------------- 00
007 TEMP_ERR
--------------------- --------------------- --------------------- 00
007 FAN_ERR
--------------------- --------------------- --------------------- 00
010 EMITTER
--------------------- --------------------- --------------------- 00
101 VPC_WDT
--------------------- --------------------- --------------------- 00
102 MEPS_WDT --------------------- --------------------- --------------------- 00
103 HOST_WDT --------------------- --------------------- --------------------- 00
104 STBY_WDT
103 HOST_WDT --------------------- --------------------- --------------------- 00
104 STBY_WDT
--------------------- --------------------- --------------------- 00
00345 000333 06789
7. Exit Self Check by turning the TV power off.
8. Cycle AC Power.
8. Cycle AC Power.
(Unplug and Plug AC Cord from the AC Outlet).
RESETTING THE TV TO FACTORY CONDITION
Use the following instructions to restore the User Adjustments and Channel
Memory settings to the preset factory conditions.
1. Turn the TV On by pressing
POWER
, then wait approximately
seconds.
2. While holding down the on the Remote Commander, press the
POWER
button on the side of the TV.
3. The set restarts and displays the Initial Setup screen. This may
take several minutes.
RESETTING THE TV TO FACTORY CONDITION USING
SERVICE MODE
1. Take the TV out of deep Standby mode by pressing
POWER
to
turn on the TV.
2. Press
POWER
to turn the TV back off.
3. Press the following buttons on the Remote Commander within a
second of each other:
DISPLAY
Channel
5
Volume
+
POWER
4. If necessary, press
JUMP
or
OPTIONS
to go to DIGITAL menu.
5. Press the following buttons on the Remote Commander within a
second of each other:
Press
8
MUTING
0
.
“SERVICE” changes to green RST.
RST executes the command and displays EXE.
EXE-RST displays green, then red indicating the TV is writing the
data.
Click on the first or last page to see other KDL-46HX850 / KDL-55HX850 service manuals if exist.