Read Sony KDL-46HX850 / KDL-55HX850 Service Manual online
KDL-46HX850/55HX850 39
SECTION 5 - UPDATES AND ADJUSTMENTS
COMPLETING SERVICE REQUIREMENTS WHEN
REPLACING THE LCD PANEL OR TCON BOARD
The following must be performed after replacing the LCD Panel or TCON
Board to ensure that all of the features for the TV will be available.
●
Updating the Software
●
Copying the BU Flash Data
●
Confirming the Model ID and Product ID
●
Resetting the Panel Operation Time
●
Clearing the Self Diagnosis Self Check Information
UPDATING THE SOFTWARE
There are 2 situations that can occur after replacing the LCD Panel or
TCON Board.
1. After replacing the LCD Panel or TCON Board, turn the TV ON.
Case 1 - If there is no picture displayed and lights flash on the front
panel, insert the USB device. The update will start automatically.
NOTE: This update may take up to 5 minutes to complete. Do not
remove the USB device, turn off the TV, or unplug the power cord
while the update is in progress.
Case 2 - If the picture displays, you will need to reset the LCD
Panel ID to force update the software. Proceed to
“Resetting the
LCD Panel to Update the Software”.
2. After the update is complete, proceed to
“Copying the BU Flash
Data”.
COPYING THE BU FLASH DATA
This procedure is to copy the White Balance adjustment data from the
TCON Board to the Main Board. The BU Flash service item is under the
VPC service menu.
Verify before proceeding to the next step:
Verify before proceeding to the next step:
;
Updated the Software
1. Take the TV out of deep Standby mode by pressing
POWER
to
turn on the TV.
2. Press
POWER
to turn the TV back off.
3. Access Service Mode by pressing the following buttons on the
Remote Commander within a second of each other:
DISPLAY
Channel
5
Volume
+
POWER
DIGITAL
SERVICE
001 OP
000 VERS
---
<MAIN>
<EXT>
DM1.109AAA
RF:0000
WF1.101WAA
WF:9.2.1.12.4
DF3.300W00AA
WF:0A
YM1.409W00AA
FD:0.071
M4.091C
(DM1.109AAA)
DD2.001W00AA
PK2.001W00AA
<PEM>
MID:0543A11F
PM1.000W00AA
PID:01041040
PB1.300W00AA
PNL:FQLR460LT0101
TUNER: ENABLE
PL2.102W00A2
PD1.004G00B0
4. Press
JUMP
or
OPTIONS
on the Remote Commander until the
VPC menu displays.
VPC
SERVICE
000
000
DATA_COPY
BU_FLASH 0
Click on the first or last page to see other KDL-46HX850 / KDL-55HX850 service manuals if exist.