Read Sony KDL-40ZX1 (serv.man2) Service Manual online
KDL-40ZX1 (AUS/NZ) 1-6
1-2-10. RF MODULE REMOVAL
Remove the 1 screw
(+PSW M3X8)
circled, disconnect the
connector indicated and slide the board away from the bracket
RF.
RF.
Screw Part number(s) and Description(s)
2-580-592-01 SCREW, +PSW M3X8 (1 Screw)
2-580-592-01 SCREW, +PSW M3X8 (1 Screw)
1-2-11. HK1 BOARD REMOVAL
Disconnect the connector from the top side of the board, release
the clip indicated and ease the board gently out of the bracket
PWB.
the clip indicated and ease the board gently out of the bracket
PWB.
1-2-12. HK2 BOARD REMOVAL
Disconnect the connector from the top side of the board, release
the clip indicated and ease the board gently out of the bracket
PWB.
the clip indicated and ease the board gently out of the bracket
PWB.
Clip
Clip
1-2-13. HI3 BOARD REMOVAL
Disconnect the connector from the top side of the board, release
the clip indicated and ease the board gently out of the bracket
PWB.
the clip indicated and ease the board gently out of the bracket
PWB.
1-2-14. ANTENNA BOARDS REMOVAL
1)
Remove antenna board 1 by releasing the clip indicated and
easing the board away from the bracket PWB.
easing the board away from the bracket PWB.
2)
Remove antenna board 2 by releasing the clip indicated and
easing the board away from the bracket PWB.
easing the board away from the bracket PWB.
Clip
Clip
Connector
Clip
Click on the first or last page to see other KDL-40ZX1 (serv.man2) service manuals if exist.