Read Sony KDL-40ZX1 (serv.man2) Service Manual online
KDL-40ZX1 (AUS/NZ) 1-4
Side cn cover
Clips
Clip
Wire Clamp
Pop
Connectors
Connectors
Connector
1-2-3. BEZEL ASSY REMOVAL (STEP 2)
Remove the 3 screws
(+P 2.6X8)
circled release the clip
indicated and remove the bezel assy gently from the bracket
PWB.
PWB.
Screw Part number(s) and Description(s)
7-685-134-19 SCREW +P 2.6X8 (3 Screws)
7-685-134-19 SCREW +P 2.6X8 (3 Screws)
1-2-4. BRACKET AND PWB REMOVAL
To remove the bracket, PWB release the wire clamp indicated,
disconnect 5 pop connectors indicated, disconnect the connector
indicated and remove the bracket PWB from the media receiver.
disconnect 5 pop connectors indicated, disconnect the connector
indicated and remove the bracket PWB from the media receiver.
1-2-5. WIRELESS MODULE UNIT REMOVAL
Remove the 4 screws
(+PSW M3X8)
circled and gently lift the
board vertically away from the media receiver to disconnect the
board to board connector.
board to board connector.
Screw Part number(s) and Description(s)
2-580-592-01 SCREW +PSW M3X8 (4 Screws)
2-580-592-01 SCREW +PSW M3X8 (4 Screws)
1-2. MBT-W1 (MEDIA RECEIVER)
1-2-1. TOP COVER REMOVAL
To remove the “TOP COVER” firstly very carefully remove the
“SIDE CN COVER” as indicated.
Then remove the 3 screws
“SIDE CN COVER” as indicated.
Then remove the 3 screws
(+BVST 3X8)
circled and slide the top
cover to the rear of the media receiver and lift upwards.
Screw Part number(s) and Description(s)
2-580-629-01 SCREW, +BVST 3X8 (3 Screws)
2-580-629-01 SCREW, +BVST 3X8 (3 Screws)
1-2-2. BEZEL ASSY REMOVAL (STEP 1)
Release the 4 clips, 2 on the top and 1 on each side and ease the
bezel assy gently away from the media receiver.
bezel assy gently away from the media receiver.
Click on the first or last page to see other KDL-40ZX1 (serv.man2) service manuals if exist.