KDL-40Z5800, KDL-40Z5810, KDL-46Z5800, KDL-52Z5800 - Sony TV Service Manual (repair manual). Page 13

To install the ‘Rear Cover’ push the clamper point as shown 
in the photo on the back surface of the ‘Rear Cover’ then 
replace all screws.

Remove the 4 stand fixing screws indicated and lift the TV 
set up and away from the ‘Stand Assy’.

Screw Part number(s) and Description(s)

2-580-608-01    SCREW, +PSW M5X16

=>=>

=>

=>

Clamper Here

Push This
Point

To remove the ‘Stay Top’ place a flat blade screwdriver as 
shown by 1 in the photo above, then lift the clamper slightly 
as shown by 2 and finally slide the clamper as shown by 3.
When reusing the ‘Stay Top’ please use with the removed 
set.

1

2

3

1

2

To install the ‘Stay Top’ slide into place as shown by 1 in the 
photo above, then push the clamper as shown by 2, making 
sure that the embossing on the clamper is locked in the hole 
of the panel.