Read Sony KDL-55X4500 Service Manual online
SERVICE MANUAL
EG1H
CHASSIS
LCD Digital Colour TV
RMF-SD001
KDL-55X4500
MODEL
KDL-55X4500
COMMANDER
RMF-SD001
DEST.
Chinese
MODEL
COMMANDER
DEST.
KDL-55X4500 (CH) 2
SPECIFICATIONS
System
Digital: GB20600-2006
Colour system
Analogue: PAL, PAL60, SECAM, NTSC4.43, NTSC3.58
Digital: MPEG-2 MP@ML/HL
Digital: MPEG-2 MP@ML/HL
Channel coverage
Analogue:D/K: VHF: C1 to C12, R1 to R12/ UHF: C13 to C57, R21 to
R60/CATV: S01 to S03, S1 to S41, Z1 to Z39
I: UHF: B21 to B69/ CATV: S01 to S03, S1 to S41
B/G: VHF: E2 to E12/ UHF: E21 to E69/
CATV: S01 to S03, S1 to S41
M: VHF: A2 to A13/ UHF: A14 to A79/
CATV: A-8 to A-2, A to W+4, W+6 to W+84
I: UHF: B21 to B69/ CATV: S01 to S03, S1 to S41
B/G: VHF: E2 to E12/ UHF: E21 to E69/
CATV: S01 to S03, S1 to S41
M: VHF: A2 to A13/ UHF: A14 to A79/
CATV: A-8 to A-2, A to W+4, W+6 to W+84
Digital:
GB20600-2006
Input/Output jacks
S video input (4-pin mini DIN)
(VIDEO) 1, 2, 3
Video input
(AUDIO) 1, 2, 3
Audio input: 500 mVrms, 47 kilohms
Supported formats: 1080p (50/60 Hz), 1080i (50/60 Hz),
720p (50/60 Hz), 576p, 576i, 480p, 480i
Y: 1 Vp-p, 75 ohms, 0.3V negative sync/P
720p (50/60 Hz), 576p, 576i, 480p, 480i
Y: 1 Vp-p, 75 ohms, 0.3V negative sync/P
B
/C
B
: 0.7 Vp-p, 75 ohms/
P
R
/C
R
: 0.7 Vp-p, 75 ohms
Video: 1080/24p, 1080p (50/60 Hz), 1080i (50/60 Hz), 720p (50/60 Hz),
576p, 576i, 480p, 480i
Audio: Two channel linear PCM
32, 44.1 and 48 kHz, 16, 20 and 24 bits
576p, 576i, 480p, 480i
Audio: Two channel linear PCM
32, 44.1 and 48 kHz, 16, 20 and 24 bits
Analogue audio input (minijack): 500 mVrms, 47 kilohms
(HDMI IN 1 only)
(HDMI IN 1 only)
(VIDEO)
Video output
(AUDIO)
Audio output
PC Input (D-sub 15-pin)
G: 0.7 Vp-p, 75 ohms, non Sync on Green/B: 0.7 Vp-p, 75 ohms/
R: 0.7 Vp-p, 75 ohms/HD: 1-5 Vp-p/VD: 1-5 Vp-p
G: 0.7 Vp-p, 75 ohms, non Sync on Green/B: 0.7 Vp-p, 75 ohms/
R: 0.7 Vp-p, 75 ohms/HD: 1-5 Vp-p/VD: 1-5 Vp-p
PC audio input (minijack)
(Headphones)
Headphones jack
DMPORT
DIGITAL MEDIA PORT
(DIGITAL AUDIO
OUT (OPTICAL)
Digital optical jack
USB
USB port
LAN
10BASE-T/100BASE-TX connector (Depending on the operating
environment of the network, connection speed may differ. 10BASE-T/
100BASE-TX communication rate and communication quality are not
guaranteed for this TV.)
environment of the network, connection speed may differ. 10BASE-T/
100BASE-TX communication rate and communication quality are not
guaranteed for this TV.)
Power and others
Power requirements
220 V AC, 50 Hz
Screen size*
139 cm (55 inches)
Display resolution
1,920 pixels (horizontal)
× 1,080 lines (vertical)
Power
consumption**
consumption**
in “ (Home)”/“
(Standard)” mode
(Standard)” mode
370 W
in “ (Shop)”/“
(Vivid)” mode
(Vivid)” mode
480 W
Standby power consumption**
Dimensions*
(w
(w
× h × d)
with Stand (mm)
without Stand (mm)
Mass*
with Stand (kg)
without Stand (kg)
*
** Specified standby power is reached after the TV finishes necessary internal processes.
** Specified standby power is reached after the TV finishes necessary internal processes.
Dimensions and mass are approximate values.
S (S VIDEO) 1
HD/DVD (HD/DVD IN) 1, 2
HDMI (HDMI IN) 1, 2, 3, 4
PC (PC IN) (RGB)
Model name
KDL-55X4500
Panel system
LCD (Liquid Crystal Display) Panel
TV system
Analogue: D/K, I, B/G, M
Sound output
9 W + 9W, 11 W + 11 W (Woofer) (as distortion of 7%)
Antenna
75 ohm external terminal for VHF/UHF
Less than 0.7 W (22 W when “ (Quick Start)” is set to “ (on)”)
1,486
× 855 × 356
1,486
× 803 × 147
54.0
47.5
KDL-55X4500 (CH) 3
Design and specifications are subject to change without notice.
PC input signal reference chart for pc (PC) and HDMI (HDMI IN) 1, 2, 3, 4
***
•
This TV’s PC input does not support Sync on Green or Composite Sync.
•
This TV’s PC input does not support interlaced signals.
•
For the best picture quality, it is recommended to use the signals in the above chart with a 60 Hz vertical
frequency (boldfaced).
frequency (boldfaced).
Product usage condition
Display Spec
View angle ( L
0
/3)*
Horizontal 85
° Vertical 80°
Definition
(TV Line)*
(TV Line)*
analog RF
Horizontal 350, Vertical 400 TVL**
SDTV
Horizontal 450, Vertical 450 TVL**
Color gamut*
Smearing time of motion picture*
20 ms **
Audio characteristic*
Sound pressure THD in rated input 10%**
*
**
**
Resolution
Horizontal
frequency (kHz)
frequency (kHz)
Vertical
frequency (Hz)
frequency (Hz)
Standard
Signals
Horizontal
(Pixel)
(Pixel)
×
Vertical
(Line)
(Line)
VGA
640
×
480
31.5
60
VGA
640
×
480
37.5
75
VESA
720
×
400
31.5
70
VGA-T
SVGA
800
×
600
37.9
60
VESA Guidelines
800
×
600
46.9
75
VESA
XGA
1024
×
768
48.4
60
VESA Guidelines
1024
×
768
56.5
70
VESA
1024
×
768
60.0
75
VESA
WXGA
1280
×
768
47.4
60
VESA
1280
×
768
47.8
60
VESA
1280
×
768
60.3
75
1360
×
768
47.7
60
VESA
SXGA
1280
×
1024
64.0
60
VESA
HDTV
1920
×
1080
67.5
60
CEA-861***
Model name
KDL-55X4500
Humidity
20% - 80%
Air Pressure
86 kPa - 106 kPa
Luminance*
350 cd/m
2
**
Contrast*
150:1 **
HDTV
Horizontal 720, Vertical 720 TVL**
32 % **
Refer to SJ/T11348-2006 <Methods of measurement for digital television flat panel displays> .
These values are required by SJ/T11343-2006 <General specification for digital television LCD displays> in normal
temperature.
These values are required by SJ/T11343-2006 <General specification for digital television LCD displays> in normal
temperature.
This affects the “ (Video Settings)” menu and “ (Screen)” menu settings.
To view PC contents, set “ (Game/Text Mode)” to “ (On)”, “ (Wide Mode)”
to “16:9 (Full)”, and “ (Display Area)” to “ (Full Pixel)”.
1080p timing when applied to the HDMI input will be treated as a video timing and not a PC timing.
Environment Temperature
5
°C - 35°C
KDL-55X4500 (CH) 4
CAUTION
These servicing instructions are for use by qualified service
personnel only.
To reduce the risk of electric shock, do not perform any servicing
other than that contained in the operating instructions unless you
are qualified to do so.
personnel only.
To reduce the risk of electric shock, do not perform any servicing
other than that contained in the operating instructions unless you
are qualified to do so.
WARNING!!
An isolation transformer should be used during any service to
avoid possible shock hazard, because of live chassis.
The chassis of this receiver is directly connected to the ac power
line.
avoid possible shock hazard, because of live chassis.
The chassis of this receiver is directly connected to the ac power
line.
!
SAFETY-RELATED COMPONENT
WARNING!!
Replace all components with Sony parts whose part numbers
appear as shown in this manual or in supplements
published by Sony.
appear as shown in this manual or in supplements
published by Sony.
WARNINGS AND CAUTIONS
SAFETY-RELATED COMPONENT
WARNING
It is essential that all critical parts be replaced only with the part
number specified in the electrical parts list to prevent electric
shock, fire, or other hazard.
number specified in the electrical parts list to prevent electric
shock, fire, or other hazard.
NOTE: Do not modify the original design without obtaining
written permission from the manufacturer or you will
void the original parts and labor guarantee.
void the original parts and labor guarantee.
USE CAUTION WHEN HANDLING THE LCD PANEL
When repairing the LCD panel, be sure you are grounded by
using a wrist band.
using a wrist band.
When repairing the LCD panel on the wall, the LCD panel must
be secured using the 4 mounting holes on the rear cover.
1) Do not press on the panel or frame edge to avoid the risk of
be secured using the 4 mounting holes on the rear cover.
1) Do not press on the panel or frame edge to avoid the risk of
electric shock.
2) Do not scratch or press on the panel with any sharp objects.
3) Do not leave the module in high temperatures or in areas of
3) Do not leave the module in high temperatures or in areas of
high humidity for an extended period of time.
4) Do not expose the LCD panel to direct sunlight.
5) Avoid contact with water. It may cause a short circuit within
5) Avoid contact with water. It may cause a short circuit within
the module.
6) Disconnect the AC power when replacing the backlight (CCFL)
or inverter circuit.
(High voltage occurs at the inverter circuit at 650Vrms.)
(High voltage occurs at the inverter circuit at 650Vrms.)
7) Always clean the LCD panel with a soft cloth material.
8) Use care when handling the wires or connectors of the inverter
8) Use care when handling the wires or connectors of the inverter
circuit. Damaging the wires may cause a short.
9) Protect the panel from ESD to avoid damaging the electronic
circuit (C-MOS).