Read Sony KDL-40X2000 Service Manual online
– 16 –
FIX
RM-ED006
Specifications
Display Unit
Power Requirements:
220–240 V AC, 50 Hz
Screen Size:
KDL-46X2000:
46 inches (Approx. 116.8 cm measured diagonally)
KDL-40X2000:
40 inches (Approx. 101.6 cm measured diagonally)
Display Resolution:
1,920 dots (horizontal) × 1,080 lines (vertical)
Power Consumption:
KDL-46X2000: 249 W
KDL-40X2000: 205 W
KDL-40X2000: 205 W
Standby Power Consumption:
0.3 W
Dimensions (w × h × d):
KDL-46X2000:
Approx. 1,262 × 795 × 322 mm (with stand)
Approx. 1,262 × 734 × 121 mm (without stand)
Approx. 1,262 × 734 × 121 mm (without stand)
KDL-40X2000:
Approx. 1,111 × 717 × 322 mm (with stand)
Approx. 1,111 × 657 × 121 mm (without stand)
Approx. 1,111 × 657 × 121 mm (without stand)
Mass:
KDL-46X2000:
Approx. 41.0 kg (with stand)
Approx. 36.0 kg (without stand)
Approx. 36.0 kg (without stand)
KDL-40X2000:
Approx. 35.0 kg (with stand)
Approx. 30.0 kg (without stand)
Approx. 30.0 kg (without stand)
Panel System
LCD (Liquid Crystal Display) Panel
TV System
Analogue:
Depending on your country/region selection:
B/G/H, D/K, L, I
B/G/H, D/K, L, I
Digital:
DVB-T
Colour/Video System
Analogue:
PAL, SECAM
NTSC 3.58, 4.43 (only Video In)
NTSC 3.58, 4.43 (only Video In)
Digital:
MPEG-2 MP@ML
Aerial
75 ohm external terminal for VHF/UHF
Channel Coverage
Analogue:
VHF:
E2–E12
UHF:
E21–E69
CATV:
S1–S20
HYPER: S21–S41
D/K:
D/K:
R1–R12, R21–R69
L:
F2–F10, B–Q, F21–F69
I:
UHF B21–B69
Digital:
VHF/UHF
Terminals
/
1
21-pin scart connector (CENELEC standard) including
audio/video input, RGB input, and TV audio/video
output.
audio/video input, RGB input, and TV audio/video
output.
/
2 (SmartLink)
21-pin scart connector (CENELEC standard) including
audio/video input, RGB input, selectable audio/video
output, and SmartLink interface.
audio/video input, RGB input, selectable audio/video
output, and SmartLink interface.
/
3
21-pin scart connector (CENELEC standard) including
audio/video input, RGB input, and audio/video output
which currently appears on the screen.
audio/video input, RGB input, and audio/video output
which currently appears on the screen.
4
Supported formats: 1080i, 720p, 576p, 576i, 480p, 480i
Y: 1 Vp-p, 75 ohms, 0.3V negative sync
P
Y: 1 Vp-p, 75 ohms, 0.3V negative sync
P
B
/C
B
: 0.7 Vp-p, 75 ohms
P
R
/C
R
: 0.7 Vp-p, 75 ohms
4
Audio input (phono jacks)
500 mVrms
Impedance: 47 kilohms
Audio input (phono jacks)
500 mVrms
Impedance: 47 kilohms
HDMI IN 5, 6
Video: 1080p, 1080i, 720p, 576p, 576i, 480p, 480i
Audio: Two channel linear PCM
Audio: Two channel linear PCM
32, 44.1 and 48 kHz, 16, 20 and 24 bits
Aanalogue audio input (phono jacks):
500 mVrms, Impedance 47 kilohms
(HDMI IN 6 only)
(HDMI IN 6 only)
7
Supported formats: 1080i, 720p, 576p, 576i, 480p, 480i
Y: 1 Vp-p, 75 ohms, 0.3V negative sync
P
Y: 1 Vp-p, 75 ohms, 0.3V negative sync
P
B
/C
B
: 0.7 Vp-p, 75 ohms
P
R
/C
R
: 0.7 Vp-p, 75 ohms
7 S video input (4-pin mini DIN)
7
Video input (phono jack)
7
Audio input (phono jacks)
OPTICAL OUT (OPTICAL OUT jack)
Audio output (phono jacks)
OPTICAL OUT (OPTICAL OUT jack)
Audio output (phono jacks)
PC
PC Input (D-sub 15-pin) (see page 47)
G: 0.7 Vp-p, 75 ohms, non Sync on Green
B: 0.7 Vp-p, 75 ohms
R: 0.7 Vp-p, 75 ohms
HD: 1-5 Vp-p
VD: 1-5 Vp-p
B: 0.7 Vp-p, 75 ohms
R: 0.7 Vp-p, 75 ohms
HD: 1-5 Vp-p
VD: 1-5 Vp-p
PC audio input (minijack)
i Headphones jack
CAM (Conditional Access Module) slot
Sound Output
11 W + 11 W
Supplied Accessories
Refer to “1: Checking the accessories” on page 4.
Optional Accessories
• Wall-Mount Bracket SU-WL51
• TV stand SU-FL61
• Colour Variation Unit
• TV stand SU-FL61
• Colour Variation Unit
CRU-46X1 (for KDL-46X2000)
CRU-40X1 (for KDL-40X2000)
CRU-40X1 (for KDL-40X2000)
Design and specifications are subject to change
without notice.
without notice.
PC Input Signal Reference Chart
• This TV’s PC input does not support Sync on Green or Composite Sync.
• This TV’s PC input does not support interlaced signals.
• For the best picture quality, it is recommended to use the signals (boldfaced) in the above chart with a 60 Hz vertical frequency
• This TV’s PC input does not support interlaced signals.
• For the best picture quality, it is recommended to use the signals (boldfaced) in the above chart with a 60 Hz vertical frequency
from a personal computer. In plug and play, signals with a 60 Hz vertical frequency will be selected automatically.
Signals
Horizontal (Pixel)
Vertical (Line)
Horizontal
frequency
(kHz)
frequency
(kHz)
Vertical
frequency (Hz)
frequency (Hz)
Standard
VGA
640
480
31.5
60
VGA
640
480
37.5
75
VESA
720
400
31.5
70
VGA-T
SVGA
800
600
37.9
60
VESA Guidelines
800
600
46.9
75
VESA
XGA
1024
768
48.4
60
VESA Guidelines
1024
768
56.5
70
VESA
1024
768
60
75
VESA
WXGA
1280
768
47.4
60
VESA
1280
768
47.8
60
VESA
1360
768
47.7
60
VESA
Click on the first or last page to see other KDL-40X2000 service manuals if exist.