Read Sony KDL-40HX850 / KDL-40HX853 / KDL-40HX855 / KDL-46HX850 / KDL-46HX853 / KDL-46HX855 / KDL-55HX850 / KDL-55HX853 / KDL-55HX855 Service Manual online
SELF DIAGNOSIS FUNCTION
The units in this manual contain a self-diagnostic function. If an error occurs, the STANDBY LED will automatically begin to flash.
The number of times the LED flashes translates to a probable source of the problem.
A definition of the STANDBY LED flash indicators is listed in the instruction manual for the user’s knowledge and reference.
If an error symptom cannot be reproduced, the remote commander can be used to review the failure occurrence data stored in memory to reveal past problems and how often these
The number of times the LED flashes translates to a probable source of the problem.
A definition of the STANDBY LED flash indicators is listed in the instruction manual for the user’s knowledge and reference.
If an error symptom cannot be reproduced, the remote commander can be used to review the failure occurrence data stored in memory to reveal past problems and how often these
DIAGNOSTIC TEST INDICATORS
When an error occurs, the STANDBY LED will flash a set number of times to
indicate the possible cause of the problem.
indicate the possible cause of the problem.
If th
i
th
th LED
ill id
tif th fi t f th
bl
problems occur.
STBY LED
Flash time
Service menu Item
name
(Screeen Display)
Diagnostic Item Description
2
MAIN_POWE
Main 12 V failure
DC_ALERT
Main 5.0/3.3/1.2 V failur
3
If there is more than one error, the LED will identify the first of the problem areas.
Result for all of the following diagnostic items are displayed on screen.
If the screen displays a “0”, no error has occurred .
DISPLAY OF STANDBY LED FLASH COUNT
AUD_PROT
Audio am p. Protection
HDMI_EQ
HDMI equalizer/s witch I2C NACK
TU_DEMOD
Tuner or dem odulator I2C NACK
4
LD_ERR
LED driver failure/LED voltage protection
P ID ERR
Panel ID EEPROM I2C NACK
5
DISPLAY OF STANDBY LED FLASH COUNT
_
_
HFR_ERR
FRC device I2C NACK
TCON_ERR
FRC device Initialization failure
TCON_ERR
E Micro (PEM) not s tarted
6
BACKLITE
Backlight converter OVP
TEMP ERR
Over tem perature protection
7
0.5
0.5
3
TEMP_ERR
Over tem perature protection
TEMP_ERR
Tem p. s ens or I2C NACK
8
-
Software Error (Als o the m ain board’s m em ory or Wi-
Fi m odule is a s us pect)
Fi m odule is a s us pect)
9
-
Not us ed
10
EMIT ERR
Trans m itter board not connected, protection
SELF-DIAGNOSTIC SCREEN DISPLAY
For errors with symptoms such as “power sometimes shuts off” or “screen sometimes goes out” that cannot be confirmed, it is possible to bring up past occurrences of failure for
confirmation on the screen:
For errors with symptoms such as “power sometimes shuts off” or “screen sometimes goes out” that cannot be confirmed, it is possible to bring up past occurrences of failure for
confirmation on the screen:
10
EMIT_ERR
(3D m odels only)
11
-
Not us ed
12
-
Not us ed
confirmation on the screen:
[To Bring Up Screen Test]
In standby mode, press buttons on the remote commander sequentially in rapid succession as shown below:
In standby mode, press buttons on the remote commander sequentially in rapid succession as shown below:
5
*
DISPLAY
TV POWER
Channel
Volume
KDL-40/46/55HX850, 853, 855
17
5
*
: Note that this differs from entering the service mode (volume +)
DISPLAY
TV POWER
Channel
Volume
Click on the first or last page to see other KDL-40HX850 / KDL-40HX853 / KDL-40HX855 / KDL-46HX850 / KDL-46HX853 / KDL-46HX855 / KDL-55HX850 / KDL-55HX853 / KDL-55HX855 service manuals if exist.