Read Sony KDL-32S5100 / KDL-40S5100 / KDL-46S5100 Service Manual online
80
KDL-32S5100/40S5100/46S5100
KDL-32S5100/40S5100/46S5100
NOTE: Les composants identifi es per un trame et
une marque
une marque
!
sont critiques pour la securite.
Ne les remplacer que par une piece portant le
numero specifi e.
numero specifi e.
NOTE: The components identifi ed by shading
and
and
!
mark are critical for safety. Replace only
with part number specifi ed.
NOTE: The components identifi ed by a red outline and a mark contain
confi dential information. Specifi c instructions must be adhered to whenever
these components are repaired and/or replaced.
See Appendix A: Encryption Key Components in the back of this manual.
confi dential information. Specifi c instructions must be adhered to whenever
these components are repaired and/or replaced.
See Appendix A: Encryption Key Components in the back of this manual.
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
4-4. CONNECTORS (KDL-40S5100/46S5100 ONLY)
(Check the
Sony Electronics Service Information
website for any additional service related issues for this model.)
151
1-836-500-11
(LVDS) HARNESS WITH CONNECTOR
(KDL-40S5100
ONLY)
151
1-836-499-11
(LVDS) HARNESS WITH CONNECTOR
(KDL-46S5100
ONLY)
152
1-910-055-33
CONN ASSY, 20P MM CRIMP 1145
(KDL-40S5100
ONLY)
152
1-910-055-35
CONN ASSY, 20P MM CRIMP 1280
(KDL-46S5100
ONLY)
153
1-910-055-54
CONN ASSY, 5P MM CRIMP 260
(KDL-40S5100
ONLY)
153
1-910-055-53
CONN ASSY, 5P MM CRIMP 175
(KDL-46S5100
ONLY)
154
1-910-055-39
CONN ASSY, 13P MM CRIMP 260
155
1-910-055-45
CONN ASSY, 4P SPEAKER FASTON
(KDL-40S5100
ONLY)
155
1-910-055-46
CONN ASSY, 4P SPEAKER FASTON
(KDL-46S5100
ONLY)
156
1-910-048-07
CONN ASSY, 7P MM CRIMP 250
(KDL-40S5100
ONLY)
156
1-910-055-57
CONN ASSY, 7P MM CRIMP 360
(KDL-46S5100
ONLY)
*
157
1-836-420-11
CONNECTOR ASSY, MDF61
(KDL-40S5100
ONLY)
*
157
1-836-419-11
CONNECTOR ASSY, MDF61
(KDL-46S5100
ONLY)
2-580-628-01
SCREW, +BVST 3X6
151
152
154
155
157
153
156
BAL
POWER UNIT
(IP1/IP2)
(IP1/IP2)
T-CON
HLR1
BM3
3004
1004
9102
1002
2000
6151
6154
6700
6000
SWITCH UNIT
SP
SP
6156
6701
HSR
NOTE: The LVDS cable can only be installed one way. There is colored tape on the cable to determine which side is attached to
the TCON and which side is attached to the BM3 Board. Please refer to Page 32 for KDL-40S5100 and
Page 41 for KDL-46S5100 of the Wire Dressing Diagram Section.
Click on the first or last page to see other KDL-32S5100 / KDL-40S5100 / KDL-46S5100 service manuals if exist.