KDL-32S2000, KDL-40S2000 - Sony TV Service Manual (repair manual). Page 4

KDL-32/40S2000 (K)     4

It is strongly recommended to use Lead Free Solder material in order  to guarantee optimal

ii

quality of new solder joints.

q

q

Lead Free Solder is available under the following part numbers:

Due to the higher melting point of Lead Free Solder the soldering iron tip temperature needs to be set to 370 degrees centigrade.
This requires soldering equipment capable of accurate temperature control coupled with a good heat recovery characteristics. 

For more information on the use of Lead Free Solder, please refer to http://www.sony-training.com          

h

h

0.3mm

0.25Kg

0.50Kg

0.5mm

0.4mm

0.50Kg

0.6mm

0.25Kg

0.8mm

1.00Kg

1.0mm

1.00Kg

1.2mm

1.00Kg

1.6mm

1.00Kg

Lead Free Solder.  The boards are identified by the LF logo located

ll

servicing of these boards requires special precautions to be taken as
outlined below.