Read Sony KDL-32NX655 Service Manual online
KDL-32NX655/40NX655 37
SECTION 5 - UPDATES AND ADJUSTMENTS
5. Do one of the following:
a. If the Standby LED blinks red 8 times, proceed to
“Replacing the Main Board” on page 37
.
b. Clear the Self Check history by following the instructions
provided in
“Clearing the Self Diagnosis Self Check
Information” on page 34
.
REPLACING THE MAIN BOARD
The Main Board should be replaced only if all other options have not
resolved the issue.
Verify before proceeding to the next step:
resolved the issue.
Verify before proceeding to the next step:
;
Verified the error is an 8X error
;
Reset the TV to Factory Condition
;
Updated the Software
1. Follow all of the instructions in
“Completing Service
Requirements When Replacing the Main Board” on page
28
.
COMPLETING SERVICE REQUIREMENTS WHEN
REPLACING THE LCD PANEL
The following must be performed after replacing the LCD Panel or TCON
Board to ensure that all of the features for the TV will be available.
;
Updating the Software
;
Confirming Model ID and Product ID
;
Resetting the Panel Operation Time
;
Clearing the Self Diagnosis Self Check information
UPDATING THE SOFTWARE
After replacing the LCD Panel or TCON Board you MUST UPDATE the
SOFTWARE to the latest version.
Whenever the LCD Panel is replaced, the software must be updated so
Whenever the LCD Panel is replaced, the software must be updated so
that the new LCD Panel syncs with the Main Board. If a message displays
indicating the latest software is already installed, proceed to Resetting the
LCD Panel to Update the Software.
There are 2 situations that can occur after replacing the LCD Panel or
TCON Board.
1. After replacing the LCD Panel or TCON Board, turn the TV
ON.
Case 1 - If there is no picture displayed and lights flash on the front
Case 1 - If there is no picture displayed and lights flash on the front
panel, insert the USB device. The update will start automatically.
NOTE: This update may take up to 5 minutes to complete. Do not
remove the USB device, turn off the TV, or unplug the power cord
while the update is in progress.
Case 2 - If the picture displays, you will need to reset the LCD
Panel ID to force update the software. Proceed to
“Resetting the
LCD Panel to Update the Software” on page 29.
2. After the update is complete, proceed to
“Confirming the
Model ID and Product ID”.
Click on the first or last page to see other KDL-32NX655 service manuals if exist.