Read Sony KDL-32CX525 / KDL-40CX525 (serv.man3) Service Manual online
KDL-32CX525/40CX525
53
SECTION 7 - SERVICE ADJUSTMENTS
RESETTING THE TV TO FACTORY CONDITION
USING SERVICE MODE
1. TV must be in Standby Mode. (POWER off).
2. Press the following buttons on the Remote Commander
2. Press the following buttons on the Remote Commander
within a second of each other:
DISPLAY
Channel 5
Volume +
POWER .
3. If necessary, press JUMP or OPTIONS to go to DIGITAL
mode.
4. Press
8
.
“SERVICE” changes to green RST.
5. Press MUTING .
RST executes the command and displays EXE.
6. Press 0 .
EXE-RST displays green, then red indicating the TV is
writing the data.
When the process is complete the green SERVICE text
displays and the LED display as shown below:
TIMER
Standby
POWER
TIMER
Standby
POWER
7. Cycle AC Power by unplugging the AC Cord from the AC
Outlet, and then plug it back in.
The set restarts and displays the Initial Setup screen.
This may take several minutes.
Click on the first or last page to see other KDL-32CX525 / KDL-40CX525 (serv.man3) service manuals if exist.