Read Sony KDL-32CX525 / KDL-40CX525 (serv.man3) Service Manual online
KDL-32CX525/40CX525
52
SECTION 7 - SERVICE ADJUSTMENTS
VPC
SERVICE
000
000
DATA_COPY
BU_TRANS 0
4. Press 2 to move to “006 WB” Category.
VPC
SERVICE
006
000
WB
R_DRV 128
5. To change the data value of the
R_DRV, press 3 to
increase the value or 6 to decrease the value.
NOTE: The data value must be set between the range 1 to
255.
6. Press 1 to move to the next item (
001 G_DRV).
7. To change the data value, press 3 to increase the value or
6 to decrease the value.
8. Repeat steps 6 and 7 for each of the following items:
002 B_DRV
003 R_BKG
004 G_BKG
005 B_BKG
9. To save the changes, press MUTING then press 0 .
10. To exit service mode, press HOME or turn the TV power
004 G_BKG
005 B_BKG
9. To save the changes, press MUTING then press 0 .
10. To exit service mode, press HOME or turn the TV power
off.
RESETTING THE TV TO FACTORY
CONDITION
Use the following instructions to restore the User Adjustments and
Channel Memory settings to the preset factory conditions.
1. While holding down the on the Remote Commander,
press the POWER button on the TV Switch Unit of the set.
2. The set restarts and displays the Initial Setup screen. This
may take several minutes.
Click on the first or last page to see other KDL-32CX525 / KDL-40CX525 (serv.man3) service manuals if exist.