KDL-26U4000, KDL-32U4000, KDL-37U4000 - Sony TV Service Manual (repair manual). Page 14

1.

Panel size configuration. Changed by TT61...TT68.

2.

D/A: D is shown when Digital mode is enabled; A is shown when Analogue mode is enabled. Changed by TT53.

3.

TT-- Command prompt.

4.

ECS/---: ECS enabled/disabled (TT31).

5.

CBA/--: CBA is shown when the TV set is in CBA mode (This mode is available from Factory mode TT19). Changed by TT27.

6.

Norm/Fact: Normal or Factory mode. Changed by TT19.

7.

DDC/---: DDC enabled/disabled. Changed by TT74.

8.

3/2/1/0: 3, 2, 1, or 0 HDMI inputs toggle. Changed by TT73.

9.

E/-: E is shown when EDID WP is enabled; - is shown otherwise. Changed by TT33.

10. N/A: Previously used to indicate Monitor, Hotel, or Otrum mode is enabled.
11. C/-: C (Default value) is shown when MSP Auto Carrier Mute function is enabled; - is shown otherwise. Changed by TT57.
12. M/A: M (Default value) is shown when AM sound is demodulated in MSP; A is shown when AFRIC demodulator is used. Changed by

TT72.

13. N/A: Previously used to indicate Clk enabled.
14. T/-: T is shown when digital test is enabled; - is shown otherwise. Changed by TT39.
15. W/-: W is shown when watchdog is enabled; - is shown otherwise. Changed by TT54.
16. C/-: C is shown when chip select is enabled; - is shown instead. This mode is only available in factory mode. Changed by TT58.
17. V/-: V is shown when visual I2C is enabled; - is shown otherwise. Changed by TT59.
18. D/-: D is shown when audio delay is enabled; - is shown otherwise. Changed by TT55.
19. K/-: K is shown when spread spectrum is enabled; - is shown otherwise. Changed by TT94.
20. B/-: B is shown for BRAVIA models; -is shown otherwise. This mode is only available in factory mode. Changed by TT56.
21. T/-: T is shown if temperature algorithm is enabled; - is shown otherwise. Changed by TT52.
22. L/-: L is shown when HDMI log is enabled; - is shown otherwise. Changed by TT34.
23. X/-: X is shown when teletext is centered (Default value); - is shown otherwise. Changed by TT14.
24. B/-: B is shown when SuperBlack algorithm is enabled; - is shown otherwise. Changed by TT51.
25. D/-: D is shown when Panel detection is enabled; - is shown otherwise. Changed by TT21.
26. G/-: G is shown when Gamma correction is enabled; - is shown otherwise. Changed by TT36.

(1)

3 2

"

D

(2)

T T

-

-

(3)

E C S

(4)

C B A

(5)

B

(20)

D

(25)

N o

r m

(6)

D D C

(7)

3

(8)

E

(9)

T

(21)

-

(10)

C

(11)

M

(12)

L

(22)

G

(26)

-

(13)

T

(14)

W

(15)

C

(16)

V

(17)

D

(18)

K

(19)

X

(23)

B

(24)