Read Sony KDL-26S2000 / KDL-26S2010 / KDL-26S2020 / KDL-26S2030 / KDL-32S2000 / KDL-32S2010 / KDL-32S2020 / KDL-32S2030 / KDL-40S2000 / KDL-40S2010 / KDL-40S2030 / KDL-46S2000 / KDL-46S2010 / KDL-46S2030 Service Manual online
– 10 –
WAX2
RM-ED005
Checking the Digital Electronic Programme Guide
(EPG)
(EPG)
*
1
In digital mode, press
to display the
Digital Electronic Programme Guide
(EPG).
(EPG).
2
Perform the desired operation, as shown in
the following table.
the following table.
Note
Programme information will only be displayed if the TV
station is transmitting it.
station is transmitting it.
* Please note that this function may not be available in some countries.
Digital Electronic Programme Guide (EPG)
To
Do this
Turn off the EPG
Press
.
Move through the EPG
Press
F
/
f
/
G
/
g
.
Watch a current programme
Press
while the current programme is selected.
Sort the programme information by
category – Category list
category – Category list
1
Press the blue button.
2
Press
F
/
f
/
G
/
g
to select a category. The category name is
displayed on the side.
The categories available include:
“Favourite”: Contains all the channels that have been stored in the
Favourite list (page 18).
“All Categories”: Contains all available channels.
“News”: Contains all news channels.
The categories available include:
“Favourite”: Contains all the channels that have been stored in the
Favourite list (page 18).
“All Categories”: Contains all available channels.
“News”: Contains all news channels.
3
Press .
The Digital Electronic Programme Guide (EPG) now only displays the
current programmes from the category selected.
The Digital Electronic Programme Guide (EPG) now only displays the
current programmes from the category selected.
Set a programme to be recorded – Timer
REC
REC
1
Press
F
/
f
/
G
/
g
to select the future programme you want to
record.
2
Press .
3
Press
F
/
f
to select “Timer REC”.
4
Press
to set the TV and your VCR timers.
A
symbol appears by that programme’s information. The
indicator on the TV (front) lights up.
Notes
• You can set VCR timer recording on the TV only for Smartlink compatible
VCRs. If your VCR is not Smartlink compatible, a message will be displayed to
remind you to set your VCR timer.
remind you to set your VCR timer.
• Once a recording has begun, you can switch the TV to standby mode, but do not
switch off the TV completely or the recording may be cancelled.
• If an age restriction for programmes has been selected, a message asking for pin
code will appear on the screen. For more details refer to “Parental Lock” on
page 32.
page 32.
Viewing pictures from
connected equipment
connected equipment
Switch on the connected equipment, then
perform one of the following operation.
perform one of the following operation.
For equipment connected to the scart sockets using a
fully-wired 21-pin scart lead
Start playback on the connected equipment.
The picture from the connected equipment appears on
the screen.
fully-wired 21-pin scart lead
Start playback on the connected equipment.
The picture from the connected equipment appears on
the screen.
For an auto-tuned VCR (page 6)
In analogue mode, press PROG +/-, or the number
buttons, to select the video channel.
In analogue mode, press PROG +/-, or the number
buttons, to select the video channel.
For other connected equipment
Press
Press
/
repeatedly until the correct input
symbol (see below) appears on the screen.
Additional operations
Using the Tools menu
Press TOOLS to display the following options when
viewing pictures from connected equipment other
than PC.
viewing pictures from connected equipment other
than PC.
AV1/
AV1, AV2/
AV2:
Audio/video or RGB input signal through the scart
socket
socket
/
1 or 2.
appears only if an RGB
source has been connected.
AV3:
Component input signal through the Y, P
B
/C
B
, P
R
/C
R
sockets
/
3, and audio input signal through the
L, R sockets
/
3.
AV4:
Digital audio/video signal is input through the HDMI IN
4 socket. Audio input signal is analogue only if the
equipment has been connected using the DVI and audio
out socket.
4 socket. Audio input signal is analogue only if the
equipment has been connected using the DVI and audio
out socket.
AV5/
AV5:
Video input signal through the video socket
5, and
audio input signal through the L (MONO), R audio
sockets
sockets
5.
appears only if the equipment is
connected to the S video socket
5 instead of the
video socket
5, and S video input signal is input
through the S video socket
5.
To
Do this
Return to the normal
TV operation
TV operation
Press DIGITAL or ANALOG.
Access the Input
signal index table
signal index table
Press
to access the Input signal
index table. (Then, only in
analogue mode, press
analogue mode, press
g
.) To
select an input source, press
F
/
f
,
then press
.
Options
Description
Power Saving
See page 27.
Picture Mode
See page 21.
Sound Mode
See page 23.
Auto Clock Set (in
analogue mode only)
analogue mode only)
Allows you to switch to digital
mode and obtain the time.
mode and obtain the time.
Sleep Timer
See page 26.
i Volume
See page 24.
Click on the first or last page to see other KDL-26S2000 / KDL-26S2010 / KDL-26S2020 / KDL-26S2030 / KDL-32S2000 / KDL-32S2010 / KDL-32S2020 / KDL-32S2030 / KDL-40S2000 / KDL-40S2010 / KDL-40S2030 / KDL-46S2000 / KDL-46S2010 / KDL-46S2030 service manuals if exist.