Read Sony KDL-26S2000 / KDL-26S2010 / KDL-26S2020 / KDL-26S2030 / KDL-32S2000 / KDL-32S2010 / KDL-32S2020 / KDL-32S2030 / KDL-40S2000 / KDL-40S2010 / KDL-40S2030 / KDL-46S2000 / KDL-46S2010 / KDL-46S2030 Service Manual online
– 9 –
WAX2
RM-ED005
3
Press
F
/
f
to select the language
displayed on the menu screens, then press
.
4
Press
F
/
f
to select the country/region in
which you will operate the TV, then press
.
If the country/region in which you want to use the
TV does not appear in the list, select “-” instead of
a country/region.
The message confirming the TV start auto-tuning
appears on the screen, then go to “6: Auto-tuning
the TV”.
TV does not appear in the list, select “-” instead of
a country/region.
The message confirming the TV start auto-tuning
appears on the screen, then go to “6: Auto-tuning
the TV”.
6: Auto-tuning the TV
The TV will now search for and store all available TV
channels.
channels.
1
Before you start auto-tuning the TV, insert
a pre-recorded tape into the VCR
connected to the TV (page 4) and start play
back.
a pre-recorded tape into the VCR
connected to the TV (page 4) and start play
back.
The video channel will be located and stored on
the TV during auto-tuning.
If no VCR is connected to the TV, this procedure
is not required. Go to step 2.
the TV during auto-tuning.
If no VCR is connected to the TV, this procedure
is not required. Go to step 2.
2
Press
G
to select “OK”, then press
.
The TV starts searching for all available digital
channels, followed by all available analogue
channels. This may take some time, please be
patient and do not press any buttons on the TV or
remote.
If a message appears for you to confirm the aerial
connections
No digital or analogue channels were found.
Check all the aerial connections and press
channels, followed by all available analogue
channels. This may take some time, please be
patient and do not press any buttons on the TV or
remote.
If a message appears for you to confirm the aerial
connections
No digital or analogue channels were found.
Check all the aerial connections and press
to
start auto-tuning again.
3
When the Programme Sorting menu
appears on the screen, follow the steps of
“Programme Sorting” (page 29).
appears on the screen, follow the steps of
“Programme Sorting” (page 29).
If you do not wish to change the order in which the
analogue channels are stored on the TV, go to step
3.
analogue channels are stored on the TV, go to step
3.
4
Press MENU to exit.
The TV has now tuned in all the available
channels.
channels.
4
2
Watching TV
1
Press
1 on the TV (top side) to switch on
the TV.
When the TV is in standby mode (the
1 (standby)
indicator on the TV (front) is red), press
"/1 on
the remote to switch on the TV.
2
Press DIGITAL to switch to digital mode or
ANALOG to switch to analogue mode.
ANALOG to switch to analogue mode.
The channels available vary depending on the
mode.
mode.
3
Press the number buttons or PROG +/- to
select a TV channel.
select a TV channel.
To select channel numbers 10 and above using the
number buttons, enter the second and third digits
within two seconds.
To select a digital channel using the Digital
Electronic Programme Guide (EPG), see page 16.
In digital mode
An information banner appears briefly. The
following icons may be indicated on the banner.
number buttons, enter the second and third digits
within two seconds.
To select a digital channel using the Digital
Electronic Programme Guide (EPG), see page 16.
In digital mode
An information banner appears briefly. The
following icons may be indicated on the banner.
Additional operations
3
1
2
2
3
:
Interactive service is available (MHEG Digital
Text)
Text)
: Interactive service (MHEG Digital Text) is
currently disabled
: Radio service
: Scrambled/Subscription service
:
Multiple audio languages available
: Subtitles available
: Subtitles available for the hearing impaired
: Recommended minimum age for current
programme (from 4 to 18 years)
:
Parental Lock
: Current programme is being recorded
To
Do this
Turn off the TV
temporarily
(Standby mode)
temporarily
(Standby mode)
Press
"/1.
Turn on the TV
from Standby mode
without sound
from Standby mode
without sound
Press
%. Press 2 +/- to set the
volume level.
Turn off the TV
completely
completely
Press
1 on the TV (top side).
Adjust the volume
Press
2 + (increase)/
- (decrease).
Mute the sound
Press
%. Press again to restore.
Access the
Programme index
table (in analogue
mode only)
Programme index
table (in analogue
mode only)
Press
. To select an analogue
channel, press
F
/
f
, then press
.
To access the Input signal index
table, see page 19.
table, see page 19.
Click on the first or last page to see other KDL-26S2000 / KDL-26S2010 / KDL-26S2020 / KDL-26S2030 / KDL-32S2000 / KDL-32S2010 / KDL-32S2020 / KDL-32S2030 / KDL-40S2000 / KDL-40S2010 / KDL-40S2030 / KDL-46S2000 / KDL-46S2010 / KDL-46S2030 service manuals if exist.