KDL-26P3000, KDL-26P300H, KDL-26P3020, KDL-26P302H, KDL-26P3030, KDL-32P3000, KDL-32P300H, KDL-32P3020, KDL-32P302H, KDL-32P3030, KDL-37P3000, KDL-37P300H, KDL-37P3020, KDL-37P302H, KDL-37P3030, KDL-40P3000, KDL-40P300H, KDL-40P3020, KDL - Sony TV Service Manual (repair manual). Page 19

1.

Panel size configuration. Changed by TT61...TT68.

2.

D/A: D is shown when Digital mode is enabled; A is shown when Analogue mode is enabled. Changed by TT53.

3.

TT-- command prompt.

4.

ECS/---: ECS enabled/disabled (TT31).

5.

CBA/--: CBA is shown when the TV set is in CBA mode (This mode is available from Factory mode TT19). Changed by TT27.

6.

Norm/Fact: Normal or Factory mode. Changed by TT19.

7.

DDC/---: DDC enabled/disabled. Changed by TT74.

8.

0/1/2: 0 or 2 HDMI inputs toggle. Changed by TT73.

9.

E/-: E is shown when EDID WP is enabled; - is shown otherwise. Changed by TT33.

10. M/HO/-: M is shown when PC monitor mode is enabled changed by TT37; H is shown when Hotel mode is enabled changed by TT35;

O is shown when OTRUM is enabled changed by TT38; - is shown otherwise.

11. C/-: C (Default value) is shown when MSP Auto Carrier Mute function is enabled; - is shown otherwise. Changed by TT57.
12. M/A: M (Default value) is shown when AM sound is demodulated in MSP; A is shown when AFRIC demodulator is used. Changed by

TT72.

13. N/A: Previously used to indicate Clk enabled.
14. T/-: T is shown when digital test is enabled; - is shown otherwise. Changed by TT39.
15. W/-: W is shown when watchdog is enabled; - is shown otherwise. Changed by TT54.
16. C/-: C is shown when chip select is enabled; - is shown instead. This mode is only available in factory mode. Changed by TT58.
17. V/-: V is shown when visual I2C is enabled; - is shown otherwise. Changed by TT59.
18. D/-: D is shown when audio delay is enabled; - is shown otherwise. Changed by TT55.
19. K/-: K is shown when spread spectrum is enabled; - is shown otherwise. Changed by TT94.
20. B/-: B is shown for BRAVIA models; -is shown otherwise. This mode is only available in factory mode. Changed by TT56.
21. S/-: S is shown if temperature sensor is enabled; - is shown otherwise. Changed by TT52.
22. L/-: L is shown when HDMI is enabled; - is shown otherwise. Changed by TT34.
23. X/-: X is shown when teletext is centered (Default value); - is shown otherwise. Changed by TT14.
24. H/A: H is shown when Hybrid tuner is selected; A is shown if ALPS tuner is selected. Changed by TT51.

(1)

2 6

"

D

(2)

T T

-

-

(3)

E C S

(4)

C B A

(5)

B

(20)

N o

r m

(6)

D D C

(7)

2

(8)

E

(9)

S

(21)

H

(10)

C

(11)

M

(12)

L

(22)

-

(13)

T

(14)

W

(15)

C

(16)

V

(17)

D

(18)

K

(19)

X

(23)

H

(24)