Read Sony DSC-H50 (serv.man3) Service Manual online
SECTION 6
ADJUSTMENTS
Revision History
Revision History
Sony EMCS Co.
Auto-ADJ
Ver. 1.4 2009.06
9-852-286-55
2009F0500-1
© 2009.6
Published by Kohda TEC
DSC-H50_ADJ
Link
Link
List of service tools
Adjusting items when replacing main parts and boards
Before starting adjustments
VIDEO SYSTEM ADJUSTMENTS
CAMERA SYSTEM ADJUSTMENTS
DESTINATION DATA WRITE
USB SERIAL No. INPUT
ADJUSTMENT PROGRAM
LCD SYSTEM ADJUSTMENTS
ERROR
PREPARATIONS BEFORE ADJUSTMENTS
CAMERA SECTION ADJUSTMENTS
• Use this Service Manual together with the Automatic Adjustment Program (DSC-H50 Auto-Adj Ver_1.4r05.exe).
APPLICATION FOR ADJUSTMENT (SeusEX)
SERVICE MODE
DATA BACKUP
SERVICE MODE
DSC-H50
RMT-DSC2
6-1
DSC-H50_ADJ
Before starting adjustments
1-1. Adjusting items when replacing main parts and boards
When replacing main parts and boards, adjust the items indicated by z in the following table.
Note:
When replacing the SY-201 board, erase the data in internal memory of the board before replacement.
Table 6-1-1
SECTION 6
ADJUSTMENTS
LCD unit
(AF illumination LED)
(Timing gen., CCD signal process)
(Video amp.)
(PITCH, YAW sensor)
LCD901
D002
IC304
IC602
SE502, SE501
(COMPLETE)
(COMPLETE)
LCD block
LE-042 board
SY-201 board
SY-201 board
SY-201 board
LE-042 board
ST-195 board
SY-201 board
Destination Data Write
Destination data write
z
USB Serial No. Input
USB serial No. input
z
Composite video level
adjustment
adjustment
Composite video level adj.
z
z
Component out Y level adj.
Component out Pb level adj.
Component out Pr level adj.
CAMERA adjustment 1
Hall adj.
z
z
CAMERA adjustment 2
Wide limit adj.
z
z
CAMERA adjustment 3
Flange back adj.
z
z
z
CAMERA adjustment 4
Flange back check
z
z
z
CAMERA adjustment 5
Light falloff balance adj.
z
z
F No. compensation
Measure gain, LV adj.
Mechanical shutter adj.
AWB 3200K-5800K standard data input
AWB 3200K-5800K check
Color reproduction adj. & check
CCD white defect compensation check
CCD black defect compensation check
CAMERA adjustment 8
Strobe adj.
z
z
z
z
z
CAMERA adjustment 9
Auto focus illumination check
z
z
z
CAMERA adjustment 10
Angular velocity sensor sensitivity adj.
z
z
z
V-COM adj.
White Balance adj.
z
Block
replacement
Mounted parts
replacement
z
z
z
z
z
LCD adjustment
CAMERA adjustment 7
z
CAMERA adjustment 6
z
z
(COMPLETE) (Note)
Adjusting item
Adjustment
Component video level
adjustment
adjustment
Board
replacement
Replaced parts
z
Lens block
CCD block assy (Including CD-737 flexible board and CCD imager)
Flash unit
z
6-2
DSC-H50_ADJ
Personal computer
(Note 1)
(Note 1)
J-1
J-11
J-10
J-8
HASP key and application
for adjustment (SeusEX)
for adjustment (SeusEX)
Contact our service headquarters of each
area how to get the application for
adjustment (SeusEX) and HASP key.
area how to get the application for
adjustment (SeusEX) and HASP key.
J-2
Pattern box PTB-450
J-6082-200-A
or
Small pattern box
PTB-1450
J-6082-557-A
J-6082-200-A
or
Small pattern box
PTB-1450
J-6082-557-A
J-5
Clear chart
For PTB-450:
J-6080-621-A
J-6080-621-A
For PTB-1450:
J-6082-560-A
J-6082-560-A
J-7
Minipattern box
J-6082-353-B
J-6082-353-B
Siemens star chart
J-6080-875-A
J-6080-875-A
Background paper
J-2501-130-A
J-2501-130-A
9 colors chart (Note 2)
For PTB-1450:
J-6082-562-A
J-6082-562-A
J-6
J-9
Flange back
adjustment jig
J-6082-563-A
adjustment jig
J-6082-563-A
AC power adaptor
AC-LS5
1-479-284-51
AC-LS5
1-479-284-51
J-12
USB cable
1-829-868-41
1-829-868-41
J-4
J-13
Camera table
J-6082-384-A
J-6082-384-A
J-14
Component
video out jig
J-6082-659-A
video out jig
J-6082-659-A
USB, A/V cable for
multi-use terminal
1-834-813-11
multi-use terminal
1-834-813-11
J-3
360 mm
155 mm
280 mm
woody board A
woody board A
9 colors chart
135 mm
Fig. 6-1-1
1-2. List of service tools
• Oscilloscope
• Color monitor
Note 1:
Personal computer
OS:
OS:
Windows 2000/XP/Vista
RAM: 256 MB or more recommended
USB: 2.0 recommended (also compatible with 1.1)
USB: 2.0 recommended (also compatible with 1.1)
Two connectors are required.
Note 2:
In using the 9 colors chart on the pattern box PTB-450, adjust the chart size through the procedure shown below so that it matches
to the pattern box PTB-450.
1) Prepare a woody board A of the thickness 5 mm, and paint it mat-black.
2) Fit the 9 colors chart in the woody board A, and secure the chart with a black tape, etc. to shield the light.
to the pattern box PTB-450.
1) Prepare a woody board A of the thickness 5 mm, and paint it mat-black.
2) Fit the 9 colors chart in the woody board A, and secure the chart with a black tape, etc. to shield the light.
Ver. 1.4 2009.06
6-3
DSC-H50_ADJ
Fig. 6-1-2
Note:
The set must be connected to the Component video out jig when performing the “Component out (Y, Pb, Pr) level adjustment” in
the “Video System Adjustment”.
the “Video System Adjustment”.
6-1. CAMERA SECTION ADJUSTMENTS
1-1.
PREPARATIONS BEFORE ADJUSTMENTS
1-1-1.
Preparations
1) Connect the equipment for adjustments according to Fig. 6-1-2.
2) Start up the application for adjustment (SeusEX).
2) Start up the application for adjustment (SeusEX).
PC
(The SeusEX must be installed in the PC.)
OS: Windows 2000/XP/Vista
RAM: 256 MB or more recommended
USB: 2.0 recommended (also compatible with 1.1)
Two connectors are required.
RAM: 256 MB or more recommended
USB: 2.0 recommended (also compatible with 1.1)
Two connectors are required.
Audio
(Black)
(Black)
Video
(yellow)
(yellow)
Color monitor
Video system Adjustment
(Composite video level adj.)
(Composite video level adj.)
Oscilloscope
Terminated
75
75
Ω
USB, A/V cable for
multi-use terminal
(1-834-813-11)
multi-use terminal
(1-834-813-11)
HASP Key
To USB
connector
connector
To Multi connector
AC IN
AC power adaptor
AC-LS5
(1-479-284-51)
AC-LS5
(1-479-284-51)
To DC IN jack
Ver. 1.4 2009.06