KDL-26P2520, KDL-26P2530, KDL-32P2520, KDL-32P2530, KDL-40P2530 - Sony TV Service Manual (repair manual). Page 10

Press 

F

/

f

 to select the language 

displayed on the menu screens, then press 

.

Press 

F

/

f

 to select the country/region in 

which you will operate the TV, then press 

.

If the country/region in which you want to use the 
TV does not appear in the list, select “-” instead of 
a country/region.
The message confirming the TV start auto-tuning 
appears on the screen, then go to “6: Auto-tuning 
the TV”.

After selecting the language and country/region, a 
message confirming the TV start auto-tuning appears 
on the screen.
The TV will now search for and store all available TV 
channels.

Press .

The TV starts searching for all available digital 
channels, followed by all available analogue 
channels. This may take some time, please be 
patient and do not press any buttons on the TV or 
remote.
If a message appears for you to confirm the aerial 
connections
No digital or analogue channels were found. 
Check all the aerial connections and press 

 to 

start auto-tuning again.

When the Programme Sorting menu 
appears on the screen, follow the steps of 
“Programme Sorting” (page 20).

If you do not wish to change the order in which the 
analogue channels are stored on the TV, go to step 
3.

Press MENU to exit.

The TV has now tuned in all the available 
channels.

Auto Start Up

Language

Country

Select:

Confirm:

Auto Start Up

Language

Country

Select:

Confirm:

Back:

Start:

Cancel:

MENU

1

2

• In TV mode (page 23): Selects the input source 

from equipment connected to the TV sockets.

• In TV menu: Selects the menu or option, and 

confirm the setting.

3

2 +/-/

G

g

• Increases (+) or decreases (-) the volume.
• In TV menu: Moves through the options left (

G

) 

or right (

g

).

4

F

f

• In TV mode: Selects the next (+) or previous (-) 

channel.

• In TV menu: Moves through the options up (

F

) or 

down (

f

).

5

1 – Power
Switches the TV on or off.
Note:
To disconnect the TV completely,  pull the plug from 
the mains.

6

• Lights up in green when the picture is switched off 

(page 19).

• Lights up in orange when the timer is set 

(page 20).

• Lights up in red when digital REC starts in standby 

mode. 

7

1 – Standby indicator
Lights up in red when the TV is in standby mode.

8

" – Power indicator
Lights up in green when the TV is switched on.

9

Press 

1 on the TV (top side) to switch on 

the TV.

When the TV is in standby mode (the 

1 (standby) 

indicator on the TV (front) is red), press 

"/1 on 

the remote to switch on the TV.

Press DIGITAL to switch to digital mode or 
ANALOG to switch to analogue mode.

The channels available vary depending on the 
mode.

Press the number buttons or PROG +/- to 
select a TV channel.