Read Sony KDL-22EX308 / KDL-32EX308 Service Manual online
KDL-22EX308/32EX308
28
SERVICE ADJUSTMENTS
6. Using the table below, press
1
to select the White Balance
Adjustment item, then press
3
to increase or press
6
to
decrease the data value.
NOTE: The data value for all White Balance Adjustments
must be set between 0~255.
ITEM
NUMBER
ITEM
NAME
DEFAULT DATA VALUE
SETTING
000
R_DRV
128
001
G_DRV
128
002
B_DRV
128
003
R_BKG
128
004
G_BKG
128
005
B_BKG
128
7. After completing all White Balance Adjustments, press
MUTING then press
0
to WRITE (Save) the changes.
2-4. RESETTING THE TV TO FACTORY CONDITION
Use the following instructions to restore the User Adjustments
and Channel Memory settings to the preset factory conditions.
1. While holding down the on the Remote Commander,
press the POWER button on the TV Switch Unit of the set.
The set restarts and displays the Initial Setup screen. This
may take several minutes.
2-4-1. RESETTING THE TV TO FACTORY CONDITION USING
SERVICE MODE
1. TV must be in Standby Mode. (POWER off).
2. Press the following buttons on the Remote Commander
within a second of each other:
DISPLAY
Channel
5
Volume
+
POWER
.
3. If necessary, press
JUMP or OPTIONS to go to DIGITAL
mode.
4. Press
8
.
“SERVICE” changes to green RST.
5. Press MUTING.
RST executes the command and displays EXE.
6. Press
0
.
EXE-RST displays green, then red indicating the TV is
writing the data.
7. When the process is complete the green SERVICE text
displays and the LED display as shown below:
TIMER
Standby
POWER
TIMER
Standby
POWER
8. Cycle AC Power (Unplug and Plug AC Cord from the AC
Outlet).
9. The set restarts and displays the Initial Setup screen.
This may take several minutes.
Click on the first or last page to see other KDL-22EX308 / KDL-32EX308 service manuals if exist.