Read Sony KDL-22EX308 / KDL-32EX308 Service Manual online
KDL-22EX308/32EX308
26
SERVICE ADJUSTMENTS
2-2-5. VERIFYING THE EMITTER OUTPUT LEVEL
If necessary, the emitter LED output level can be increased or decreased.
25. Press
2
until the
009 3D category displays.
PEM
SERVICE
009
000
EMIT_STR
3D
0
Default
Data Value
26. Using the table below, press
3
to increase or press
6
to
decrease the data value.
DATA VALUE
SETTING
0
Strong (Default)
1
Weak
27. Press
MUTING then press
0
to WRITE (Save) the changes.
28. Exit Service Mode by turning the TV Power Off.
29. Proceed to “Verifying the Model and Panel Information”.
2-2-6. VERIFYING THE MODEL AND PANEL INFORMATION
After saving the changes to the service data, verify the information.
1. TV must be in standby mode. (Power off).
2. Access Service Mode.
Press the following buttons on the Remote Commander
within a second of each other:
DISPLAY
Channel
5
Volume
+
POWER
3. Display the
DIGITAL Service Menu.
NOTE: There are 4 Service Menus for these models,
DIGITAL, CHASSIS, SUB, and PEM. If the DIGITAL Service
Menu is not displayed, press
JUMP or OPTIONS on the
Remote Commander.
DIGITAL
SERVICE
001 OP
000 VERS
---
<MAIN>
<SUB>
DM1.301J00AA
SM1.010W00AA
M2.105C
SB1.000W00AA
DD1.016J00AA
SD1.010W00AA
(DM1.3 01J00AA)
RF01.05
WP00.521J00AA
ID1C117081
ID 2597318f
PID0c720000
WF:2.0.0.99
<BEM>
WF:0B
BM1.012W00LU
Camera FW
BB1.000W00LU
Camera FW
BD1.011J46LUX
---.---------
T216XW01
Model ID
Product ID
4. Using the table, verify the Model ID and the Product ID
match the information in the Service Menu.
Model Name
Model ID Product ID
Panel Code
KDL-22EX308
2597318f
0c720000
T216XW01 V3
KDL-22EX308
2597318f
0c720000
T216XW01 V301
KDL-32EX308
25973193
0c720000
LTY(Z)320AP04
KDL-32EX308
25973194
0c720000
T315XW04 V0
5. Exit Service Mode by pressing HOME or turn the
TV power off.
Click on the first or last page to see other KDL-22EX308 / KDL-32EX308 service manuals if exist.