Read Sony KDF-46E3000 / KDF-50E3000 Service Manual online
KDF-46E3000/50E3000
KDF-46E3000/50E3000
10
SECTION 1: DISASSEMBLY
1-1. OVERVIEW
The connectors in this chassis have been redesigned to ensure they are securely fasten to the boards. Please review the illustra-
tions below.
tions below.
TOOLS NEEDED
Long Phillips Screwdriver
Needle Nose Pliers
Small Flathead Screwdriver or Jewelers Screwdriver
Long Phillips Screwdriver
Needle Nose Pliers
Small Flathead Screwdriver or Jewelers Screwdriver
LIFT ONE SIDE AT A TIME
BY PUSHING TAB IN WITH
SMALL SCREWDRIVER
TYPE 1
TYPE 2
SQUEEZE DOWN ON
TAB TO RELEASE
SQUEEZE LOCKING TAB
TOWARDS CONNECTOR
BEFORE PULLING FREE
TYPE 3
CAUTION! IF THE TYPE 2 FEMALE
CONNECTOR HAS A SLOT (AS SHOWN)
MAKE SURE THE LOCK TAB SEATS INSIDE
THIS SLOT.
Use caution not to rock the Type 2 or Type 3 connectors when removing or reinstalling to avoid breaking the solder leads off the
Printed Circuit Boards.
Printed Circuit Boards.
Click on the first or last page to see other KDF-46E3000 / KDF-50E3000 service manuals if exist.