Read Sony KDE-W50A12U / KE-W50A10E Service Manual online
– 13 –
AT2X
RM-EA001 / RM-ED001
Set Up menu
Starts the “first time operation menu” to tune in all the available digital and analogue
channels. Usually you do not need to do this operation because the channels are already
tuned when the TV was first installed (page 13). However, this option allows you to repeat
the process (e.g., to retune the TV after moving house, or to search for new channels that
have been launched by broadcasters).
channels. Usually you do not need to do this operation because the channels are already
tuned when the TV was first installed (page 13). However, this option allows you to repeat
the process (e.g., to retune the TV after moving house, or to search for new channels that
have been launched by broadcasters).
1
Press OK to select “Auto Start Up”.
2
Press OK to select “Yes”.
The auto-tune display appears on the screen.
3
Follow steps 1 to 4 of “7: Auto-tuning the TV” (page 13).
Tunes in all the available analogue channels.
Usually you do not need to do this operation because the channels are already tuned when
the TV was first installed (page 13). However, this option allows you to repeat the process
(e.g., to retune the TV after moving house, or to search for new channels that have been
launched by broadcasters).
Usually you do not need to do this operation because the channels are already tuned when
the TV was first installed (page 13). However, this option allows you to repeat the process
(e.g., to retune the TV after moving house, or to search for new channels that have been
launched by broadcasters).
1
Press OK to select “Auto Tuning”.
2
Follow steps 1 and 2 of “7: Auto-tuning the TV” (page 13).
When all available analogue channels have been tuned, the TV returns to normal
operation.
operation.
Changes the order in which the analogue channels are stored on the TV.
1
Press OK to select “Programme Sorting”.
2
Press
M/m to select the channel you want to move to a new position,
then press OK.
3
Press
M/m to select the new position for your channel, then press OK.
Repeat the procedure in steps 2 and 3 to move other channels if required.
You can select the options listed below on the Set Up
menu. To select options, see “Navigating through
menus” (page 19).
menu. To select options, see “Navigating through
menus” (page 19).
Auto Start Up
Auto Tuning (Analogue mode only)
Programme Sorting (Analogue mode only)
Select:
Set:
Back:
OK
End:
MENU
Auto Start Up
Auto Tuning
Programme Sorting
Programme Labels
AV Preset
Manual Programme Preset
Digital Set Up
Auto Tuning
Programme Sorting
Programme Labels
AV Preset
Manual Programme Preset
Digital Set Up
Set Up
Continued
Assigns a channel name of your choice up to five letters or numbers. The name will be
displayed briefly on the screen when the channel is selected. (Names for channels are usually
taken automatically from Analogue Text (if available).)
displayed briefly on the screen when the channel is selected. (Names for channels are usually
taken automatically from Analogue Text (if available).)
1
Press OK to select “Programme Labels”.
2
Press
M/m to select the channel you want to name, then press OK.
3
Press
M/m/</, to select the desired letter or number (“s” for a blank
space), then press OK.
If you input a wrong character
Press
M/m/</, to select %/5 and press OK repeatedly until the wrong character is
selected. Then, press
M/m/</, to select the correct character and press OK.
4
Repeat the procedure in step 3 until the name is complete.
5
Press
M/m/</, to select “End”, then press OK.
Do the following options.
1
Press OK to select “AV Preset”.
2
Press
M/m to select the desired input source, then press OK.
3
Press
M/m to select the desired option below, then press OK.
Before selecting “Label”/“AFT”/“Audio Filter”/“Skip”/“ATT”, press PROG +/- to select the
programme number with the channel. You cannot select a programme number that is set to
skip (page 32).
programme number with the channel. You cannot select a programme number that is set to
skip (page 32).
1
Press OK to select “Manual Programme Preset”.
2
Press
M/m to select one of the following options, then press OK.
Programme Labels (Analogue mode only)
AV Preset
Option
Description
Label
Assigns a name to any equipment connected to the side or rear
sockets. The name will be displayed briefly on the screen when the
equipment is selected.
sockets. The name will be displayed briefly on the screen when the
equipment is selected.
Press
M/m to select one of the following, then press OK.
Equipment labels: Uses one of these preset labels.
Edit: Creates your own label. Follow steps 3 to 5 of “Programme
Labels” (page 30).
Edit: Creates your own label. Follow steps 3 to 5 of “Programme
Labels” (page 30).
Skip
Skips an input source that is not connected to any equipment when
you press
you press
M/m to select the input source.
After selecting this option, press OK.
Manual Programme Preset (Analogue mode only)
Click on the first or last page to see other KDE-W50A12U / KE-W50A10E service manuals if exist.