Read Sony KD-49X8505B / KD-55X8505B / KD-55X9005B / KD-65S9005B / KD-65X8505B / KD-65X9005B / KD-65X9505B / KD-70X8505B / KD-75S9005B / KD-79X9005B / KD-85X9505B / KDL-32W705B / KDL-32W705C / KDL-32W706B / KDL-40W605B / KDL-40W705C / KDL-42W705B / KDL-42W706B / KDL Service Manual online
RB2G / RB2T
CHASSIS
18
SERVICE PROCEDURE
( T-Con)
( T-Con)
VPC
SERVICE
003 VCOM
000 ENABLE 0
000 ENABLE 0
5 ii) Press “OPTIONS” until “VPC” service mode
shows.
a.
Select “003 VCOM” category by pressing
“2 / 5” on remote.
“2 / 5” on remote.
b.
Select “000 ENABLE” item by pressing
“1 / 4” on remote.
“1 / 4” on remote.
c.
Change ENABLE from “0” to “1” by
pressing “3” to enable VCOM adjustment.
pressing “3” to enable VCOM adjustment.
5 iii) in “VPC” service mode
VPC
SERVICE
003 VCOM
001 ADJUST 64
001 ADJUST 64
a.
Select “003 VCOM” category by
pressing “2 / 5” on remote.
pressing “2 / 5” on remote.
b.
Select “001 ADJUST” item by
pressing “1 / 4” on remote.
pressing “1 / 4” on remote.
c.
Change data by pressing “3 / 6” on
remote.
remote.
d.
Press “Mute”, “0” on remote
sequentially. Red “WRITE” is
shown. This indicates writing is in
process. After a while, red
“WRITE” disappears.
sequentially. Red “WRITE” is
shown. This indicates writing is in
process. After a while, red
“WRITE” disappears.
e.
Green Done will be displayed for a
while, which means writing
process is done.
while, which means writing
process is done.
DIGITAL
SERVICE
007 VCOM
000 SRV_OSD_END 0
000 SRV_OSD_END 0
(For HE [42/50/55/60/70 inch], HM [60 inch] only)
6. Press “OPTIONS” until “VPC” service mode shows.
a.Select “001 DATA_BACKUP” category by pressing “2 / 5” on remote.
b.Change data from “0” to “1” by pressing “3 / 6” on remote.
c.Wait until data is changed from 1 to 3.
d.When data is changed from 1 to 3, restoring process is finished.
e.In case data is changed from 1 to 2, restoring process is failure
[this function not support].
b.Change data from “0” to “1” by pressing “3 / 6” on remote.
c.Wait until data is changed from 1 to 3.
d.When data is changed from 1 to 3, restoring process is finished.
e.In case data is changed from 1 to 2, restoring process is failure
[this function not support].
Reference Table
Remote Commander
a
b
End restore process
VPC
SERVICE
001
DATA_BACKUP
000
BU_FLASH
3
DATA TRANSFER SUCCESS
Restore process
VPC
SERVICE
001
DATA_BACKUP
000
BU_FLASH
1
DO NOT POWER OFF
DO NOT TOUCH ANY KEY NOW
DO NOT TOUCH ANY KEY NOW
OPTIONS
Seg.
Model Name
HT
KDL-** W900B, W950B, W955B, W957B
HX
XBR-** X950B, X955B, X957B, KD-** X9500B, X9505B
HJ
XBR-** X900B, X905B, X907B, KD-** X9000B, X9005B, X9200B
HA
XBR-** X850B, X855B, X857B, KDL-** X830B, KD-** X8000B, X8500B, X8505B
HC
KD-**S9000B, S9005B
(For HT, HX, HJ, HA, HC)
Please adjust VCOM to minimize
the flicker of the screen.
the flicker of the screen.
1: Show Service menu
0: Hide Service menu
0: Hide Service menu
5 iv) in “Digital” service mode
a.
Select “007 VCOM” category by
pressing “2 / 5” on remote.
pressing “2 / 5” on remote.
b.
Select “000 SRV_OSD_END” item
by pressing “1 / 4” on remote.
by pressing “1 / 4” on remote.
c.
Change data by pressing “3 / 6” on
remote to hide or show the menu
screen.
remote to hide or show the menu
screen.
d.
Back to 5 ii) and change ENABLE
to “0” and finish VCOM adjustment.
to “0” and finish VCOM adjustment.
Click on the first or last page to see other KD-49X8505B / KD-55X8505B / KD-55X9005B / KD-65S9005B / KD-65X8505B / KD-65X9005B / KD-65X9505B / KD-70X8505B / KD-75S9005B / KD-79X9005B / KD-85X9505B / KDL-32W705B / KDL-32W705C / KDL-32W706B / KDL-40W605B / KDL-40W705C / KDL-42W705B / KDL-42W706B / KDL service manuals if exist.