Read Sony KD-32NX200AUS Service Manual online
- 18 -
Additional Information
Additional Information
31
Troubleshooting
Here are some simple solutions to problems which may affect the picture and sound.
Problem
Cause
Solution
No picture, no sound.
•
Power off.
•
TV in standby.
•
Aerial disconnected.
•
Plug in the TV.
•
If the
1 indicator is lit, press the
TV I/
1 button on the remote control.
•
Press the
! button on the front of the
TV.
•
Check aerial connection.
Poor or no picture (screen is dark), good
sound.
sound.
•
Low picture settings.
•
Access the ‘Picture Adjustment’
menu and adjust the ‘Brightness’,
‘Colour’ and ‘Contrast’ settings.
Refer to page 20.
menu and adjust the ‘Brightness’,
‘Colour’ and ‘Contrast’ settings.
Refer to page 20.
No picture on any channel after digital
tuning.
tuning.
•
No digital transmissions in your area.
•
Weak signal.
•
Unsuitable aerial.
•
Tune in all available analogue
channels. Refer to ‘Manual
Programme Preset’ on page 24.
Contact a local installer to find out
when digital transmissions begin in
your area.
channels. Refer to ‘Manual
Programme Preset’ on page 24.
Contact a local installer to find out
when digital transmissions begin in
your area.
•
Ensure aerial/satellite dish is
correctly aligned to transmitter.
correctly aligned to transmitter.
•
Ensure aerial is plugged directly into
the TV (not through other
equipment).
the TV (not through other
equipment).
•
Upgrade to a higher gain aerial.
•
Upgrade to a higher gain aerial.
Some channels are blank.
•
Scrambled/Subscription only
channel.
channel.
•
Channel not being transmitted.
•
Channel used only for data (no
picture or sound).
picture or sound).
•
Subscribe to the pay-per-view
service.
service.
•
Contact the broadcaster for
transmission details
transmission details
Standby indicator flashing.
•
Digital programme set for ‘Timer
Record’ (regular flash).
Record’ (regular flash).
•
Fault (irregular flashing).
•
Refer to ‘The Info menu’ on page 17.
•
Do not open the cabinet, refer to
qualified personnel.
qualified personnel.
•
Contact your nearest
Service Centre.
Good picture, no sound
•
Low or muted volume
•
Press the
2 + button on the remote
control.
•
If
% is displayed, press the % button
on the remote control.
No colour on colour programmes.
•
Low colour level settings.
•
Access the ‘Picture Adjustment’
menu and adjust the ‘Colour’ setting.
Refer to page 20.
menu and adjust the ‘Colour’ setting.
Refer to page 20.
Remote control does not work.
•
Batteries low.
•
Wrong mode selected
•
Replace batteries.
•
Press the MODE button repeatedly
to select TV mode.
to select TV mode.
Distorted picture when changing
programmes or selecting text.
programmes or selecting text.
•
Connected equipment switched on.
•
Switch off external equipment (VCR,
DVD player etc.)
DVD player etc.)
•
If you continue to have these problems, have your TV serviced by qualified personnel.
•
NEVER open the casing yourself.
KD-32NX200AUS
410251811
4-102-518-11
Lifting the
TV
Set
Click on the first or last page to see other KD-32NX200AUS service manuals if exist.