Read Sony KD-32NX200AUS Service Manual online
- 13 -
Getting Started
Getting Started
5
1.
When you switch on the TV for the first time, the Sony logo is displayed
on the TV screen, followed by the ‘Picture Rotation’ prompt. Sometimes
the Earth’s natural magnetism can cause the screen to look slanted.
on the TV screen, followed by the ‘Picture Rotation’ prompt. Sometimes
the Earth’s natural magnetism can cause the screen to look slanted.
a) If no correction is required, press
B to select ‘Not Necessary’.
b) If some correction is required, press OK to select ‘Adjust now’.
Press
V or v to correct the slant. Press OK to confirm.
2.
The ‘Autotune’ prompt appears on the TV screen. Press OK to select
‘Yes’.
‘Yes’.
3.
The ‘Region Set-up’ menu appears on the TV screen. Press
V or v to
highlight your chosen region. Press OK to confirm.
The digital autotune display appears on screen and the TV starts to
search for all the available digital channels. This may take some time,
please be patient and do not press any buttons on the TV or remote
control.
search for all the available digital channels. This may take some time,
please be patient and do not press any buttons on the TV or remote
control.
If no digital or analogue channels are found, a message appears asking
to confirm that the aerial is connected correctly. Check all the aerial
connections and press OK to start the automatic tuning process again.
to confirm that the aerial is connected correctly. Check all the aerial
connections and press OK to start the automatic tuning process again.
When the digital autotune is complete, the analogue autotune starts to
search for all the available analogue channels.
search for all the available analogue channels.
Once all available digital and analogue channels have been stored, the
TV returns to normal operation, displaying the digital channel stored on
channel number 1. If no digital channels were found, the analogue
channel stored on channel number 1 is displayed.
TV returns to normal operation, displaying the digital channel stored on
channel number 1. If no digital channels were found, the analogue
channel stored on channel number 1 is displayed.
The TV has now tuned
in all the available channels
1.
Press the DIGITAL/
a button to switch between digital and analogue
mode.
In digital mode, an information banner appears briefly on screen when
the channel is changed.
the channel is changed.
In analogue mode, the channel number appears in green lettering when
the channel is changed.
the channel is changed.
Switching between digital and analogue mode
6
The ‘Autotune’ prompt.
Automatically tuning the TV
5
The ‘Picture Rotation’ prompt.
Do you want to start
automatic tuning?
automatic tuning?
Yes:
OK
No:
The ‘Region Set-up’ menu.
Digital Set-up
Region Set-up
Press OK key to set your region
NEW SOUTH WALES / AUSTRALIAN CAPITAL TERRITORY
VICTORIA
QUEENSLAND
SOUTH AUSTRALIA
WESTERN AUSTRALIA
TASMANIA
VICTORIA
QUEENSLAND
SOUTH AUSTRALIA
WESTERN AUSTRALIA
TASMANIA
Back
NORTHERN TERRITORY
If picture slants, please
adjust picture rotation.
Not Necessary:
Adjust Now:
OK
Basic Operation
Basic Operation
9
Everyday use
This section explains the various functions and operations used during everyday
viewing. Most operations can be done using the remote control.
viewing. Most operations can be done using the remote control.
1.
Press the On/Off button (labelled
!) on the front of the TV to switch
on the TV.
When the TV is in standby mode (the
When the TV is in standby mode (the
1 indicator on the TV is lit red),
press the TV I/
1 button on the remote control to switch on the TV.
2.
Press the PROG+/- buttons on the TV or press the PROG+/- or
Numbered buttons on the remote control to select a TV channel.
When selecting double digit numbers using the Numbered buttons, enter
the second digit within two seconds.
Numbered buttons on the remote control to select a TV channel.
When selecting double digit numbers using the Numbered buttons, enter
the second digit within two seconds.
3.
Press the
2 +/- buttons on the TV or on the remote control to adjust the
volume.
Additional operations
To
Press
Turn off the TV temporarily
(standby)...
(standby)...
TV I/
1 on the remote control. When
the TV is in standby mode the
1
indicator on the TV is lit red. Press
again to return to normal TV operation.
again to return to normal TV operation.
Mute the sound...
% button on the remote control. Press
again to cancel.
again to cancel.
Switch between analogue and digital
mode...
mode...
DIGITAL/
a button.
If the TV is in digital mode an
information banner appears briefly on
screen when you change channels.
If the TV is in analogue mode the
channel number appears in green
lettering when you change channels.
information banner appears briefly on
screen when you change channels.
If the TV is in analogue mode the
channel number appears in green
lettering when you change channels.
Change the Screen Mode...
button. Refer to page 10.
Watch pictures from equipment
connected to the TV’s front and rear
sockets (video input mode)...
connected to the TV’s front and rear
sockets (video input mode)...
t button on the TV or t/ button
on the remote control repeatedly until
the picture appears. Refer to page 27.
on the remote control repeatedly until
the picture appears. Refer to page 27.
z
For example, if you wish to view pictures from a DVD player connected to the
2
socket on the rear of the TV, press the
t/
button repeatedly until the
2
symbol appears on the TV screen together with the DVD picture.
Please note, most equipment connected to the rear sockets, when activated, will
send a signal to the TV. The TV will automatically display the picture for you.
Please note, most equipment connected to the rear sockets, when activated, will
send a signal to the TV. The TV will automatically display the picture for you.
Access text services (depending on
availability of service)...
availability of service)...
/ button on the remote control.
Refer to pages 12 and 13.
Refer to pages 12 and 13.
Access the Digital Electronic
Programme Guide (EPG)...
Programme Guide (EPG)...
button on the remote control.
Refer to page 15.
Return to normal TV operation (from
text, video input mode, TV menu
system, INFO menu, EPG and
Channel Index menu)...
text, video input mode, TV menu
system, INFO menu, EPG and
Channel Index menu)...
DIGITAL/
a button.
DIGITA
L/a
GU
IDE
MO
DE
IN
DE
X
DIGITAL/
a button
t/
button
Numbered
button
button
button
/
button
PROG +/-
buttons
2 +/-
buttons
% button
TV I/
1 button
button
4
4
o4
On/Off
button
button
t
button
PROG +/-
buttons
buttons
2 +/-
buttons
The operating instructions mentioned here are partial abstracts from the ‘Operating
Instruction Manual’. The page numbers of the ‘Operating Instruction Manual’ remain
as in the manual.
Instruction Manual’. The page numbers of the ‘Operating Instruction Manual’ remain
as in the manual.
SECTION 1
GENERAL
Click on the first or last page to see other KD-32NX200AUS service manuals if exist.