Read Sony KD-28DL11U Service Manual online
- 9 -
To cancel a recording
The Timer pop-up menu also has a ‘Timer list’ option. This list appears only after
you have set a programme to record or to wake up. If you highlight ‘Timer list’ and
press the OK button, a screen is displayed showing all the programmes you have
set for recording or wake up. To delete one of these programmes, proceed as
follows:
you have set a programme to record or to wake up. If you highlight ‘Timer list’ and
press the OK button, a screen is displayed showing all the programmes you have
set for recording or wake up. To delete one of these programmes, proceed as
follows:
c) Manual timer REC***
Highlight ‘Manual timer REC’ and press OK if you wish to record a future
programme. The Manual Timer display appears.
Highlight ‘Manual timer REC’ and press OK if you wish to record a future
programme. The Manual Timer display appears.
Press the
V or v button to set the day of recording, then press the b
button to move to the start time. Repeat this procedure to set the start and
stop times and the channel number, then press the OK button to store
and return to the EPG menu.
stop times and the channel number, then press the OK button to store
and return to the EPG menu.
Press the
button to remove the EPG menu. Unless you have a
SMARTLINK VCR, you must now set the timer recording function of your
VCR to switch on and off to correspond with the programme you have
stored for recording.
VCR to switch on and off to correspond with the programme you have
stored for recording.
Press the OK button to display the ‘Timers’ menu.
1.
Press the
V or v button to highlight the programme you wish to delete.
2.
Press the OK button to confirm deletion.
3.
Press the
button when you wish to return to normal TV operation.
***The ‘Manual timer REC’ feature only works if
you have connected your VCR to the AV2 socket
you have connected your VCR to the AV2 socket
i2/r
on the rear of the TV. After you have
programmed a recording you can put the TV into
standby mode, but do not switch off completely
or the recording will be cancelled. If you put the
TV into standby mode, the standby indicator on
the front of the TV flashes green periodically to
remind you a recording has been programmed.
standby mode, but do not switch off completely
or the recording will be cancelled. If you put the
TV into standby mode, the standby indicator on
the front of the TV flashes green periodically to
remind you a recording has been programmed.
Using the TV menu
system
system
Use the following buttons to operate the TV menu system.
The individual menus are explained on the following pages.
Picture Adjustment menu
1.
To
Press
Access the TV menu system...
MENU button.
Highlight an option...
V or v buttons.
Enter the highlighted menu or
option...
option...
b button.
Return to the last menu or option...
B button.
Alter the settings of a selected
option...
option...
V, v, B or b buttons.
Store settings/changes...
OK button.
2.
Press the MENU button to return to normal TV operation.
Mode
This option allows you to choose between three picture mode settings, ‘Live’,
‘Movie’ and ‘Personal’.
This option allows you to choose between three picture mode settings, ‘Live’,
‘Movie’ and ‘Personal’.
With the ‘Mode’ option highlighted, press the
b button to adjust. Press the V or
v button to select the required mode. Press the OK button to confirm.
Contrast, Brightness, Colour, Sharpness, Hue
These options allow you to adjust the contrast, brightness, colour, sharpness
and hue.
Contrast, Brightness, Colour, Sharpness, Hue
These options allow you to adjust the contrast, brightness, colour, sharpness
and hue.
‘Sharpness’ is not adjustable in digital mode. ‘Hue’ is only available when
viewing an NTSC colour signal, e.g. USA video tapes.
viewing an NTSC colour signal, e.g. USA video tapes.
With the required option highlighted, press the
b button to adjust. Press the B or
b button to set the level. Press the OK button to confirm.
Reset
This option resets all picture settings to the factory preset levels.
Reset
This option resets all picture settings to the factory preset levels.
With the ‘Reset’ option highlighted, press the OK button to restore default picture
settings.
settings.
OK
button
button
V, v, B, and b
buttons
MENU
button
button
The ‘Picture Adjustment’ menu.
Picture Adjustment
Mode: Personal
Contrast
Brightness
Colour
Sharpness
Hue
Reset
Contrast
Brightness
Colour
Sharpness
Hue
Reset
OK
Click on the first or last page to see other KD-28DL11U service manuals if exist.