Read Sony KD-28DL11U Service Manual online
- 11 -
Specifications
TV System
I/DVB-T
Colour System
PAL
NTSC 3.58, 4.43 (only Video In)
MPEG-2 MP@ML
NTSC 3.58, 4.43 (only Video In)
MPEG-2 MP@ML
Channel Coverage
UHF:
B21-B69
Picture Tube
FD Trinitron WIDE Approx. 71cm (28inches)
Sound Output
Left/Right:
2x14W (music power), 2x7W (RMS)
Power Consumption
97W
Dimensions (w x h x d)
Approx. 790 x 515 x 525 mm
Weight
Approx. 43kg
Rear Terminals
i1/
21-pin Euro connector (CENELEC
standard) including audio/video input,
RGB input, TV audio/video output.
standard) including audio/video input,
RGB input, TV audio/video output.
i2/r
21-pin Euro connector (CENELEC
standard) including audio/video input,
S-VIDEO input, selectable audio/
video output.
standard) including audio/video input,
S-VIDEO input, selectable audio/
video output.
RF In (DIGITAL)
RF In (ANALOGUE)
RF Out
Audio output - phono jacks.
PCMCIA (for future use only).
MODEM
MODEM jack (for future use only).
Front Terminals
i
Headphone jack - minijack stereo.
r
3
S-Video input - 4 pin DIN
t3
Video input - phono jack.
o3
Audio input - phono jack.
Supplied Accessories
RM-949 remote control (1)
IEC designated size AA (R06) battery (2)
RF Lead.
IEC designated size AA (R06) battery (2)
RF Lead.
Design and specification are subject to change without notice.
Troubleshooting
Here are some simple solutions to problems which may affect the picture and sound.
Problem
Cause
Solution
No picture, no sound.
•
Power off.
•
TV in standby.
•
Aerial disconnected.
•
Plug in the TV.
•
If the
1 indicator is lit, press the
TV I/
1 button on the remote control.
•
Press the
! button on the front of the
TV.
•
Check aerial connection.
Poor or no picture (screen is dark), good
sound.
sound.
•
Low picture settings.
•
Access the ‘Picture Adjustment’
menu and adjust the ‘Brightness’,
‘Colour’ and ‘Contrast’ settings.
menu and adjust the ‘Brightness’,
‘Colour’ and ‘Contrast’ settings.
No picture on any channel after digital
tuning.
tuning.
•
No digital transmissions in your area.
•
Weak signal.
•
Unsuitable aerial.
•
Tune in all available analogue
channels. Refer to the section
‘Manual Programme Preset’. Contact
a local installer to find out when
digital transmissions begin in your
area.
channels. Refer to the section
‘Manual Programme Preset’. Contact
a local installer to find out when
digital transmissions begin in your
area.
•
Ensure aerial is correctly aligned to
transmitter.
transmitter.
•
Ensure aerial is plugged directly into
the TV (not through other
equipment).
the TV (not through other
equipment).
•
Upgrade to a higher gain aerial.
•
Upgrade to a higher gain aerial.
Some channels are blank.
•
Channel not being transmitted.
•
Channel used only for data (no
picture or sound).
picture or sound).
•
Contact the broadcaster for
transmission details
transmission details
Standby indicator flashing.
•
Fault (irregular flashing).
•
Digital programme set for ’Timer
Record’ (regular flash)
Record’ (regular flash)
•
Do not open the cabinet, refer to
qualified personnel.
qualified personnel.
•
Contact your nearest
Service Centre.
•
Refer to the EPG section of this
manual.
manual.
Good picture, no sound
•
Low or muted volume
•
TV speakers turned ‘Off’.
•
Press the
2 + button on the remote
control.
•
If
% is displayed, press the % button
on the remote control.
•
Set TV speakers to ‘On’ in the Detail
Adjustment menu.
Adjustment menu.
No colour on colour programmes.
•
Low colour level settings.
•
Access the ‘Picture Adjustment’
menu and adjust the ‘Colour’ setting.
menu and adjust the ‘Colour’ setting.
Remote control does not work.
•
Batteries low.
•
Replace batteries.
Distorted picture when changing
programmes or selecting text.
programmes or selecting text.
•
Connected equipment switched on.
•
Switch off external equipment (VCR,
DVD player etc.)
DVD player etc.)
•
If you continue to have these problems, have your TV serviced by qualified
personnel or contact the
personnel or contact the
UK Digital HelpLine on 0870 600 1717.
•
NEVER open the casing yourself.
Click on the first or last page to see other KD-28DL11U service manuals if exist.