Read Sony VPL-HS51 Service Manual online
3
VPL-HS51
1. Introduction
This protocol manual describes the basic configuration and basic operations of various commands used
for projector. Projector can be controlled using the commands provided in “Appendix”. Using an external
CONTROLLER , etc., inputs can be switched and the power can also be turned on and off. In the follow-
CONTROLLER , etc., inputs can be switched and the power can also be turned on and off. In the follow-
ing paragraphs, “CONTROLLER” means an external device such as a PC which controls projector using
these commands.
these commands.
2. Operating the Projector from a Computer
2-1. Accessing the Projector from a Computer
You can check the present status of the projector on a computer display and control the projector from a
computer.
computer.
Confirm that the projector and computer are connected to the router/hub with the LAN cables, then turn
on the projector, computer and router/hub.
on the projector, computer and router/hub.
1.
Start Internet Explorer 5.0 (or later versions) on your computer.
2.
Type “http://xxx.xxx.xxx.xxx (the IP address of the projector)” as the “Address”, then press the
ENTER key on your keyboard.
ENTER key on your keyboard.
You can check the IP address of the projector using the INFORMATION menu.
Enter the IP address here.
Enter the IP address here.
Click on the first or last page to see other VPL-HS51 service manuals if exist.