Read Sony RM-PJAW10 / VPL-BW7 Service Manual online
1-4
VPL-BW7
1-3-4. Power Board and Thermal Sensor Board
Screw
(+PSW M4
(+PSW M4
x 6)
Five tapping screws
(PAN M3
(PAN M3
x 7)
Tapping screw
(PAN M3
(PAN M3
x 7)
MB bracket
Thermal sensor board
Power board
Remove the three connectors.
Lamp nozzle assembly
Fuse (H.B.C.)
(F601)
(F601)
Miniature fuse-links (F602)
CN603
CN605
CN701
Dowel
Power board
Power board
Lamp nozzle assembly
Remove the fan in the
direction of the arrow.
direction of the arrow.
J1
Main board
(Refer to section 1-3-3.)
Fan
Lamp nozzle assembly
Be careful that the harnesses must not override on
top of this port or must not be pinched by this portion.
top of this port or must not be pinched by this portion.
Check to see that the seven connectors are
protruding from the MB bracket.
protruding from the MB bracket.
Caution :
When attaching the MB bracket, bind the four harnesses into the shape
of “U” and attaching them to the MB bracket.
When attaching the MB bracket, bind the four harnesses into the shape
of “U” and attaching them to the MB bracket.
Door detection
switch board
Click on the first or last page to see other RM-PJAW10 / VPL-BW7 service manuals if exist.