Read Sony RM-PJAW10 / VPL-BW7 Service Manual online
1-8
VPL-BW7
1-3-9. Lamp Power Supply
2 Fan (Exhaust)
80*25 AD0812HB/HB
80*25 AD0812HB/HB
(Refer to section 1-3-8.)
1 Lamp box assembly
3 Lamp nozzle assembly
4 Focus/Zoom adjust
assembly
assembly
5 Optical unit assembly
(Refer to sections 1-3-6, 1-3-7.)
Route the harness A
through the hole of
this sheet.
through the hole of
this sheet.
Caution :
When re-assembling the machine,
route the respective harnesses and
wires at the specified locations as shown.
When re-assembling the machine,
route the respective harnesses and
wires at the specified locations as shown.
A
B
C
D
Lamp power supply
Door detection switch board
Route the Lamp connector
assembly D between them.
assembly D between them.
6 Two tapping screws
(PAN M3
(PAN M3
x 7)
8 Remove the lamp power supply
in the direction of the arrow E.
in the direction of the arrow E.
!= Claw
![ Door detection
switch board
switch board
7 Two harnesses
Door detection
switch board
CN1
X1
A
C
E
B
D
Lamp power supply
!- Lamp power supply
9 Lamp connector
assembly
assembly
0 Mylar ballast
Mylar ballast
Click on the first or last page to see other RM-PJAW10 / VPL-BW7 service manuals if exist.