Read Sony RM-PJ4 / VPL-ES3 Service Manual online
1-6
VPL-ES3
1-3-7.
Optics Section
2 Lamp box assembly
6 Optics section
1 Rotate the Zoom dial clockwise
as shown until it is stopped.
as shown until it is stopped.
4 Focus/Zoom adjust
assembly
assembly
1 Two tapping screws
(PAN 3
(PAN 3
x 7)
3 Two tapping screws
(PAN 3
(PAN 3
x 7)
5 Four screws
(+P 2.5
(+P 2.5
x 8)
2 Rotate the Focus dial
counter-clockwise as
shown until it is stopped.
counter-clockwise as
shown until it is stopped.
3 Rotate the Focus dial
counter-clockwise as
shown until it is stopped.
counter-clockwise as
shown until it is stopped.
5 Install the Optics section
in the Lower Case.
in the Lower Case.
During the assembling process,
never change the gear position
that is set by step 3.
never change the gear position
that is set by step 3.
4 Rotate the Focus/Zoom Adjust Assembly
counter-clockwise until it is stopped.
counter-clockwise until it is stopped.
6 Install the Focus/Zoom
Adjust Assembly as shown.
Adjust Assembly as shown.
7 After installation is completed, verify that the Optics
section can rotate from the position A to the position
B smoothly.
section can rotate from the position A to the position
B smoothly.
A
B
Lower case
Assembling Method of Optics section and
Focus/Zoom Adjust Assembly
Focus/Zoom Adjust Assembly
Phase matching
Focus dial
Click on the first or last page to see other RM-PJ4 / VPL-ES3 service manuals if exist.