IFU-HS1, RM-PJHS1, SU-HS1, VPL-HS1, VPL-HS1FP - Sony Projector Service Manual (repair manual). Page 9

Read Sony IFU-HS1 / RM-PJHS1 / SU-HS1 / VPL-HS1 / VPL-HS1FP Service Manual online

1-3
VPL-HS1
GB 
4
Precautions
Precautions
On safety
• Check that the operating voltage of your unit is 
identical with the voltage of your local power 
supply.
• Should any liquid or solid object fall into the 
cabinet, unplug the unit and have it checked by 
qualified personnel before operating it further. 
• Unplug the unit from the wall outlet if it is not to be 
used for several days. 
• To disconnect the cord, pull it out by the plug. Never 
pull the cord itself. 
• The wall outlet should be near the unit and easily 
accessible. 
• The unit is not disconnected to the AC power source 
(mains) as long as it is connected to the wall outlet, 
even if the unit itself has been turned off. 
• Do not look into the lens while the lamp is on.
• Do not place your hand or objects near the 
ventilation holes. The air coming out is hot. 
On preventing internal heat build-up 
After you turn off the power with the 
I
 / 1 (on/
standby) switch, do not disconnect the unit from the 
wall outlet while the cooling fan is still running.
Caution
The projector is equipped with ventilation holes 
(intake) and ventilation holes (exhaust). Do not block 
or place anything near these holes, or internal heat 
build-up may occur, causing picture degradation or 
damage to the projector.
On repacking
Save the original shipping carton and packing 
material; they will come in handy if you ever have to 
ship your unit. For maximum protection, repack your 
unit as it was originally packed at the factory. 
5
 GB
Unpacking / Step 1: Installing the Projector
Connections and 
Preparations
Connections and Preparations
This section describes how to install the projector and 
screen, how to connect the equipment from which  
you want to project the picture, etc.
Unpacking
Check the carton to make sure it contains the 
following items:
Remote control (1), 
Size AA (R6) 
batteries (2)
Signal interface 
cable (1)
Air filter (for 
replacement) (1)
Lens cap (1)
AC power cord (1)
Operating Instructions (1)
Inserting the batteries into the remote 
control
Step 1: Installing 
the Projector
You can obtain good picture quality even when you 
project the picture from the side of the screen (“SIDE 
SHOT”) (1 page 7). You can enjoy home 
entertainment with this projector in various situations.
Enjoying home theater
Enjoying video games on a large screen
Insert the batteries 
E
 side first 
as shown in the illustration.
Page of 127
Display

Click on the first or last page to see other IFU-HS1 / RM-PJHS1 / SU-HS1 / VPL-HS1 / VPL-HS1FP service manuals if exist.