DPP-SV55 - Sony Other Service Manuals Service Manual (repair manual). Page 9

1-4

DPP-SV55 V1 (UC, CE)

Install the Sony DPP-SV55 Printer Driver Software for Mac OS 8.5.1/8.6/9.0 Ver. 1.0   (“printer
driver” in this manual) into your Macintosh.

For the connections, refer to “Connecting the printer” of “Operating Instructions  – Basic
Operations.”

Close all programs before running the installer.

The selected language folder opens.

Installation starts.  Follow the instructions on the screen to complete installation.

When the software becomes unnecessary, remove the software as follows: In step 5, click
“Uninstall.”

You can use an application software to print your computer’s hard disk images with the DPP-
SV55 Digital Photo Printer.

Paper/Margin

To make Post Card Size borderless print, click “Post Card” and no
margin icon 

.  To make border Post Card Size print, click “Post

Card” and margin icon 

. To make Small Size print, click “Small.”

Orientation

To print a wide image, click landscape icon 

.

To print a tall image, click portrait icon 

 .

Overcoat

Select the overcoat type (“Glossy”/“Texture”).

Enlarge/Reduce

Select the enlarged or reduced size to be printed.

Specify the printing range and copies.  Then click
“Preview” to display the print preview or “Print”
to start printing.

•We cannot guarantee the printer operations when a

hub is used or when two or more USB devices are
connected to your computer.

•When two or more DPP-SV55 printers are

connected to your computer, you cannot operate
the printer.

•You cannot operate the printer from another USB

device being used simultaneously.

The supplied software enables you to print an image from your Macintosh with the Digital
Photo Printer DPP-SV55. To print an image from the computer, you need a commercially
available printing application software.

To use the supplied software, you need a Macintosh computer that must meet the
following system requirements.

Mac OS 8.5.1/8.6/9.0 should be pre-installed.

USB port should be installed as standard.

32 MB or more (64 MB or more is recommended.)

50 MB or more (It depends on the number of copies you print.)

CD-ROM drive (for software installation)

To make a print as expected, we suggest you use the
application software that allows you to check the print
preview.  Otherwise, make the image size to 1664
(dots) x 2466 (dots) and the resolution to 403 dpi. 

LOCK

LOCK

• Operate the printer on 120 V AC, 60 Hz (for

the US model) or 220 to 240 V AC, 50/60 Hz 
(for the models for other areas) only.

• Be careful not to set or drop any heavy

objects on the power cord, or to damage the
power cord in any way. Never operate this
printer with a damaged power cord.

• Should any solid object or liquid fall into

the cabinet, unplug the printer and have it
checked by qualified personnel before
operating it any further.

• Never disassemble the printer.
• To disconnect the power cord, pull it out by

the plug. Never pull the power cord itself.

• When the printer is not going to be used for

an extended period of time, disconnect the
power cord from the wall outlet.

• Do not handle the printer roughly.
• To reduce the risk of electrical shock,

always unplug the printer from the
electrical outlet before cleaning and
servicing the printer.

• Avoid placing the printer in a location

subject to:
– vibration
– high humidity
– excessive dust
– direct sunlight
– extremely high or low temperatures

• Do not use electrical equipment near the

printer. The printer will not work properly
in electromagnetic fields.

• The printer is designed to operate

horizontally. Never attempt to operate the
printer in a tilted position.

• Do not place heavy objects on the printer.
• Leave enough room around the printer so

that the ventilation holes are not blocked.
Blocking these holes may cause internal
heat build-up.

If the printer is brought directly from a cold
location to warm location or placed in an
extremely warm or humid room, moisture
may condense inside the unit. In such cases
the printer will probably not work properly
and may even develop a fault if you persist in
using it. If moisture condensation occurs, turn
off the power and do not use the printer for at
least one hour.

When you transport the printer, remove the
print cartridge, paper tray, the “Memory
Stick” or PC card from the printer and put the
printer and its peripherals in the original box
with the protective packaging.
If you no longer have the original box and
packing parts, use similar packing material so
that the printer will not be damaged while
transporting.

Clean the cabinet, panel and controls with a
soft dry cloth, or a soft cloth lightly moistened
with a mild detergent solution. Do not use any
type of solvent, such as alcohol or benzine,
which may damage the finish.

If duplicating documents with the printer, pay
special attention to the following:
• Duplication of banknotes, coins, or

securities is against the law.

• Duplication of blank certificates, licenses,

passports, private securities, or unused
postal stamps is also against the law.

• TV program, films, video tapes, others’

portraits or other materials may be
copyrighted.  Unauthorized video printing
of such materials may infringe the
provisions of the copyright law.

The printer can read and write “Memory
Stick” and PC card (PCMCIA ATA compatible
type II flash memory cards with a power
specification of 5V or 3.3/5V).  By using a
commercially available PC card adaptor, you
can also use Smart Media and other types of
compact flash cards.

There are two types of “Memory Stick”:
general “Memory Stick” and “MagicGate
Memory Stick.”  The “MagicGate Memory
Stick” is equipped with the MagicGate
copyright protection technology that uses
encryption technology.  You can use both types
of “Memory Stick” with your printer.
However, because the printer does not support
the MagicGate standards, data recorded with
the printer is not subject to MagicGate
copyright protection.

To prevent accidental erasure of important
image data, slide the write protect switch on
the “Memory Stick” to the write protect
position when you just view the images.
Only when you write, delete data, or format a
“Memory Stick,” slide it to the write enable
position.

•You cannot use the PC cards with the power

specification of 3V only.

•Do not insert other types of PC card into the

printer’s insertion slot.  The printer may be
damaged.

•Do not drop, bent, or submit the “Memory Stick”

or PC card to external shock.

•Do not disassemble or modify the “Memory Stick”

or PC card.

•Avoid getting liquids on the “Memory Stick” or

PC card.

•Avoid using or storing the “Memory Stick” or PC

card in a location subject to:

– extremely high temperature such as the hot

inside of a car or the outdoors exposed to a
burning sun, or a place near a heater.

– direct sunlight
– high humidity
– corrosive substances
– excessive dust
– electrostatic or electronic noises
– magnetic fields

•Avoid touching the connector of the “Memory

Stick” or contacting it with a metal object.

•When attaching a label to the “Memory Stick” as

specified in the illustration, use the label supplied
for the “Memory Stick” only.  Do not use any other
labels.

•When storing and carrying the “Memory Stick” or

PC card, keep it in its original case to ensure
protection of important data.

•Avoid removing the “Memory Stick” or PC card

from the insertion slot or turning off the power of
the printer while the printer is accessing the
“Memory Stick” or PC card.  Otherwise, data may
be rendered unreadable.

• When using a compact flash card or Smart Media,

use a commercially available PC card adaptor that
is compatible with the card.   Attach the card into
the adaptor and then insert it into the printer.  For
how to install the card and adaptor, refer to the
operating instructions of the PC card adaptor.

•Avoid inserting or removing the compact flash

card or Smart Media into or out of the PC card
adaptor while the PC card adaptor is inserted in
the printer.  The data may be rendered unreadable
or erased.