Read Sony DPP-SV55 Service Manual online
4-2
DPP-SV55 V1 (UC, CE)
7.
Perform the density adjustment so that the obtained density is equal to the reference density.
To increase (decrease) the print density
Increasing the density: Turn
Increasing the density: Turn
1VR1 (22 V ADJ.) of the power block clockwise.
Decreasing the density: Turn
1VR1 (22 V ADJ.) of the power block counterclockwise.
Adjust
1VR1 until the obtained density becomes equal to the reference density and print the test
pattern (LINEAR STEP).
8.
When message “Test1 to Test6/7 Exit” is displayed with the Arrow key (
↑
) pressed, select “Exit”
and press the ENTER key.
n
In steps 6 and later, the test pattern is printed only using one sheet of paper.
In steps 6 and later, the test pattern is printed only using one sheet of paper.
Click on the first or last page to see other DPP-SV55 service manuals if exist.