DPP-FP90 - Sony Other Service Manuals Service Manual (repair manual). Page 17

Read Sony DPP-FP90 Service Manual online

4-1
DPP-FP90
4. ADJUSTMENT AND CHECK
NOTE ON MAIN BOARD REPLACEMENT
When replacing MAIN board, be sure to write the latest firmware.
For detail, refer to “4-2-3. FIRMWARE WRITING AND VERSION
UPGRADE”.
When writing of the latest firmware and version upgrade is completed,
be sure to delete the old driver and to install the driver newly again.
NOTES ON THERMAL PRINTER (MD) AND MAIN
BOARD REPLACEMENT
When replacing the thermal printer (MD) and MAIN board, be sure
to adjust the density.
For detail, refer to Section 4-2-1.
NOTES ON LCD ADJUSTMENT AFTER
REPLACEMENT
When replacing the LCD, be sure to LCD contrast can be adjusted
and the color display can be check using the service mode as follows.
For detail, refer to Section 4-2-2.
* If destination is changed after version upgrade is
completed, execute both items of destination change
and LCD contrast adjustment (VCOM).
ADJUSTING ITEMS WHEN REPLACING MAIN
PARTS
When replacing main parts, adjust the items indicated by z in the
following table.
    LCD replacement
    MD replacement
    MAIN board replacement
    KEY board replacement
    MSSD board replacement
    Firmware version upgrade
Main Parts Replacement
z z
z
z
*
z
z
*
z z
z z
z
z z
z z
z
z
z
z z z
z
Adjustment
Items
Check
Items
Density adjustment
LCD contrast adjustment
(VCOM), Color display check
Firmware writing
Destination setting
Fan operation check
Button operation check
LED operation check
Tray sensor
Ribbon sensor
Memory card reading check
(MS, MSDuo, SD, miniSD, CF)
USB communication check
Print check
CHECKSUM check
Page of 26
Display

Click on the first or last page to see other DPP-FP90 service manuals if exist.