DPP-FP67 - Sony Other Service Manuals Service Manual (repair manual). Page 11

2-2E

DPP-FP67

8.

The orange frame is moved with an upper or lower button to
choose OK and the ENTER button is pushed.

9.

The screen becomes updating display, and STANDBY LED
blinks.

Please do not turn off the power supply of the printer, and do
not pull out Memory Stick from the printer while STAND-
BY LED is blinking.
The previous firmware disappears, and the normal perfor-
mance of the printer and the firmware might not be able to
be updated.

10. When the update of the firmware ends, blinking STANDBY

LED ends, it turns off.
The screen becomes update end display. (The version after it
updates it is displayed.)
Turn off the power supply pushing the power button.

When there is no update file in the Memory Stick inserted
with "Procedure 6" or it is a version that is the same as the
firmware that already exists in the printer or former, it be-
comes the following error display.

Memory Stick that the update file enters is pulled out from the printer
and confirmed.

1.

Turn on the power supply pushing the power button.

2.

If a printer initial screen is displayed, the MENU button is
pushed. The following menu initial screen is displayed.
If nothing has been inserted in Memory Stick and the terminal
USB (A and B), a set icon has been selected with the orange
frame.

3.

Select a set icon and push the ENTER button.
The set menu screen is displayed.
Select a information display icon with an upper and lower, right
and left button, and push the ENTER button.

4.

The version number of the firmware of the printer is displayed,
and confirm it is an updated version, please.