DPF-W700, DPF-WA700 - Sony Other Service Manuals Service Manual (repair manual). Page 9

Read Sony DPF-W700 / DPF-WA700 Service Manual online

DPF-W700/WA700
– 9 –
3. DESTINATION  SETTING
When the following part is replaced, perform the destination setting.
•  Complete MAIN board
DPF-W700
Procedure:
1.  Insert the AC adapter to turn the power on.
2.  Confirm that the standby lamp has lit up green, and press the [MENU] 
button after about 2 seconds.
– Rear top view –
Standby lamp
 Note 
1: Continue pressing the [MENU] button untilthe following screen is 
displayed.
Version
Group
FW   0.25 (04139B95)
Displayed characters/values are example.
boot   0.07 (99E32857)
bootloader   1.00
MAC 00:45:A2:25:64:34
MK
SQA
Dev
Normal
Settings
TestMode
Destination
Restore all settings
3.  Touch the “Destination” tab.
Version
Group
FW   0.25 (04139B95)
Displayed characters/values are example.
boot   0.07 (99E32857)
bootloader   1.00
MAC 00:45:A2:25:64:34
MK
SQA
Dev
Normal
Settings
TestMode
Destination
Restore all settings
4.  Touch the button in “Destination” corresponding to destination which 
you desire.
 
(The selected button is changed into red)
Displayed characters/values are example.
Destination
LCD Type
NN
J1
U2
AU3 CA2 CED
CEU CN9 E32 E35
CEK
Settings
TestMode
Destination
E33 JE3 AR2
TW6
KR2
BR4
5.  Confirm that the “LCD Type” (lower part of the screen) is displayed 
as “NN”.
 
When displayed as “N”, touch the “N” button, and confirm that 
display changes to “NN”.
Destination
LCD Type
Displayed characters/values are example.
NN
AU3 CA2 CED
CEU CN9 E32 E35
CEK
Settings
TestMode
Destination
J1
U2
E33 JE3 AR2
TW6
KR2
BR4
6.  Touch the “Settings” tab, and touch the “Normal” button in “Group”. 
The selected button is changed into red.
Version
Group
FW   0.25 (04139B95)
Displayed characters/values are example.
boot   0.07 (99E32857)
bootloader   1.00
MAC 00:45:A2:25:64:34
MK
SQA
Restore all settings
Dev
Normal
Settings
TestMode
Destination
7.  Touch the “Restore all settings” button, and wait until the display 
changes to “Finish”.
 Note 
2: “Restore all settings” takes about 5 minutes. 
 
     
Please do not touch the touch panel by any means during work.
 
     
When the screen does not change even if 6 minutes or more pass, 
unplug the AC adaptor, and redo work from the beginning.
 Note 
3: In the repair whitch does not exchange the complete MAIN board, 
do not perform “Restore all settings”.
 
     
All the informations (settings, built-in memory etc.) are cleared.
Version
Group
FW   0.25 (04139B95)
boot   0.07 (99E32857)
bootloader   1.00
MAC 00:45:A2:25:64:34
MK
SQA
Restore all settings
Dev
Normal
Settings
TestMode
Destination
Displayed characters/values are example.
Restore...
Finish
8.  Unplug the AC adaptor to turn the power off.
– ENGLISH –
DPF-WA700
Procedure:
1.  Insert the AC adapter to turn the power on while pressing the [VOL 
+] button.
 Note 
1: Continue pressing the [VOL +]  button until the following screen 
is displayed.
upgrading... please wait
2.  The following screen is displayed. Press the [
VOL +
] button and 
select the “reboot into factory test”, and press the [MENU] button.
 
(This unit is rebooted, and enter the “Factory Test” mode)
 Note 
2: It takes 30 to 40 seconds until the “Factory Test” mode enters.
System recovery <3e>
System recovery utility
reboot system now
apply update from sdcard
reset data
reboot into factory test
System recovery <3e>
When the customer is not 
performing network update: 
When the customer is 
performing network update: 
System recovery utility
reboot system now
apply update from sdcard
wipe data/factory reset
wipe cache partition
wipe media partition
reboot into factory test
3.  Touch the character in “Destination” corresponding to destination 
which you desire.
 
(The selected character is changed into red)
Destination
J1
U2
CA2 CEK CED CEU E33 E32 AU3 JE3
KR2 CN9 TW6 AR2 BR4 E35
LCD
N
NN
Developer.
SQA
MK
Group:
Normal
Version:
KarnelVersion: 2.6.34 kanda@jpc00115762#7
MonOct3 19:25:12JST2011
ChecksumNumber:e614efbe
1.10.06
OSVersion:
2.3.4
SDG
Restore all settings:
Done
ON
OFF
Settings
TestMode
Displayed characters/values are example.
Action
4.  Touch the “NN” in “LCD”.
 
(The selected character is changed into red)
Destination
J1
U2
CA2 CEK CED CEU E33 E32 AU3 JE3
KR2 CN9 TW6 AR2 BR4 E35
LCD
N
NN
Developer.
SQA
MK
Group:
Normal
Version:
KarnelVersion: 2.6.34 kanda@jpc00115762#7
MonOct3 19:25:12JST2011
ChecksumNumber:e614efbe
1.10.06
OSVersion:
2.3.4
SDG
ON
OFF
Settings
TestMode
Displayed characters/values are example.
Restore all settings:
Done
Action
5.  Touch the “Normal” in “Group:”.
 
(The selected character is changed into red)
Destination
J1
U2
CA2 CEK CED CEU E33 E32 AU3 JE3
KR2 CN9 TW6 AR2 BR4 E35
LCD
N
NN
Developer.
SQA
MK
Group:
Normal
Version:
KarnelVersion: 2.6.34 kanda@jpc00115762#7
MonOct3 19:25:12JST2011
ChecksumNumber:e614efbe
1.10.06
OSVersion:
2.3.4
SDG
ON
OFF
Settings
TestMode
Displayed characters/values are example.
Restore all settings:
Done
Action
6.  Confirm that “SDG” is “OFF”. When “ON” is red, touch the “OFF”, 
and confirm that “OFF” changes to red.
 Note 
3: Do not make it “ON” by any means.
Destination
J1
U2
CA2 CEK CED CEU E33 E32 AU3 JE3
KR2 CN9 TW6 AR2 BR4 E35
LCD
N
NN
Developer.
SQA
MK
Group:
Normal
Version:
KarnelVersion: 2.6.34 kanda@jpc00115762#7
MonOct3 19:25:12JST2011
ChecksumNumber:e614efbe
1.10.06
OSVersion:
2.3.4
SDG
ON
OFF
Settings
TestMode
Displayed characters/values are example.
Restore all settings:
Done
Action
7.  Touch the “Action” in “Restore all settings”.
 
(The background of “Action” is changed white, and the character color 
of “Done” is change into red. Then this unit is rebooted automatically)
 Note 
4: “Restore all settings” takes about 5 minutes. Please do not touch 
the touch panel by any means during work.
 Note 
5: In the repair whitch does not exchange the complete MAIN board, 
do not perform “Restore all settings”.
 
     
All the informations (settings, built-in memory etc.) are cleared.
Destination
J1
U2
CA2 CEK CED CEU E33 E32 AU3 JE3
KR2 CN9 TW6 AR2 BR4 E35
LCD
N
NN
Developer.
SQA
MK
Group:
Normal
Version:
KarnelVersion: 2.6.34 kanda@jpc00115762#7
MonOct3 19:25:12JST2011
ChecksumNumber:e614efbe
1.10.06
OSVersion:
2.3.4
SDG
ON
OFF
Settings
TestMode
Displayed characters/values are example.
Restore all settings:
Done
Action
Action
Done
8.  After “Restore all settings” is completed, confirm that the following screen 
has been displayed, and unplug the AC adaptor to turn the power off.
 Note 
6: Do not touch the screen by any means.
The touch screen will be calibrated.
Follow the instructions displayed on the screen.
Tap the screen to procees to the nesxt step.
Ver. 1.1 2012.01
The changed portions from 
Ver. 1.0 are shown in blue.
Page of 22
Display

Click on the first or last page to see other DPF-W700 / DPF-WA700 service manuals if exist.

Random: