Read Sony DPF-W700 / DPF-WA700 Service Manual online
DPF-W700/WA700
– 17 –
33. Touch the “Settings” on the screen.
34. Touch the “Wi-Fi Settings” on the screen.
Settings
Wi-Fi Settings
General Settings
Date/Time Settings
35. Touch the “Set up Wi-Fi” on the screen.
Wi-Fi Settings
Wi-Fi
Set up Wi-Fi
SSID
36. Refer to “Wi-Fi settings” on next page, perform the Wi-Fi setting
and confirm that Wi-Fi connection is normally possible.
37. The subsequent works are different by the exchanged parts.
• When front cover assy or touch panel are exchanged:
Unplug the AC adaptor to turn the power off, and end “OPERA-
TION CHECKS”.
• When complete MAIN board is exchanged:
Perform the work of step 38 to 42, and end “OPERATION CHECKS”.
38. Press the [1] button on this unit for more 2 seconds, and touch the
“OK” to turn the power off.
Power off
Turn off the power.
!
OK
Cancel
39. Press the [1] button on this unit to turn the power on while pressing
the [VOL +] button.
Note
4: Continue pressing the [VOL +] button until the following screen
is displayed.
upgrading... please wait
40. The following screen is displayed. Press the [
VOL +
] button and
select the “reboot into factory test”, and press the [MENU] button.
(This unit is rebooted, and enter the “Factory Test” mode)
Note
5: It takes 30 to 40 seconds until the “Factory Test” mode enters.
System recovery <3e>
System recovery utility
reboot system now
apply update from sdcard
reset data
apply update from sdcard
reset data
reboot into factory test
System recovery <3e>
When the customer is not
performing network update:
performing network update:
When the customer is
performing network update:
performing network update:
System recovery utility
reboot system now
apply update from sdcard
wipe data/factory reset
wipe cache partition
wipe media partition
apply update from sdcard
wipe data/factory reset
wipe cache partition
wipe media partition
reboot into factory test
41. Touch the “Action” in “Restore all settings”.
(The background of “Action” is changed white, and the character color
of “Done” is change into red. Then this unit is rebooted automatically)
of “Done” is change into red. Then this unit is rebooted automatically)
Note
6: “Restore all settings” takes about 5 minutes. Please do not touch
the touch panel by any means during work.
Note
7: In the repair whitch does not exchange the complete MAIN board,
do not perform “Restore all settings”.
All the informations (settings, built-in memory etc.) are cleared.
Destination
J1
J1
U2
CA2 CEK CED CEU E33 E32 AU3 JE3
KR2 CN9 TW6 AR2 BR4 E35
LCD
N
NN
Developer.
SQA
MK
Group:
Normal
Version:
KarnelVersion: 2.6.34 kanda@jpc00115762#7
KarnelVersion: 2.6.34 kanda@jpc00115762#7
MonOct3 19:25:12JST2011
ChecksumNumber:e614efbe
ChecksumNumber:e614efbe
1.10.06
OSVersion:
2.3.4
SDG
ON
OFF
Settings
TestMode
Displayed characters/values are example.
Restore all settings:
Done
Action
Action
Done
42. After “Restore all settings” is completed, confirm that the following
screen has been displayed, and unplug the AC adaptor to turn the
power off.
power off.
Note
8: Do not touch the screen by any means.
The touch screen will be calibrated.
Follow the instructions displayed on the screen.
Follow the instructions displayed on the screen.
Tap the screen to procees to the nesxt step.
Ver. 1.1 2012.01
The changed portions from
Ver. 1.0 are shown in blue.
Ver. 1.0 are shown in blue.
Click on the first or last page to see other DPF-W700 / DPF-WA700 service manuals if exist.