Read Sony DPF-HD1000 / DPF-HD700 / DPF-HD800 (serv.man2) Service Manual online
DPF-HD700/HD800/HD1000
– 2 –
Note:
• -XX and -X mean standardized parts, so
• -XX and -X mean standardized parts, so
they may have some difference from the
original one.
original one.
• Items marked “*” are not stocked since
they are seldom required for routine ser-
vice. Some delay should be anticipated
when ordering these items.
vice. Some delay should be anticipated
when ordering these items.
• The mechanical parts with no reference
number in the exploded views are not sup-
plied.
plied.
Ref. No.
Part No.
Description
Ref. No.
Part No.
Description
51
A-1898-329-A FRONT CASE ASSY B SERVICE (BLACK)
51
A-1898-685-A FRONT CASE ASSY W SERVICE (WHITE)
52
A-1898-327-A MAIN BOARD, COMPLETE (for SERVICE)
53
3-080-205-21
SCREW, TAPPING, P2 (SILVER) (for WHITE)
53
3-080-206-21
SCREW, TAPPING, P2 (BLACK) (for BLACK)
54
4-295-882-01 VIEW
BUTTON
B SERVICE (VIEW MODE, 1) (BLACK)
54
4-295-882-11
VIEW BUTTON W SERVICE (VIEW MODE, 1) (WHITE)
55
4-295-883-01
LIGHT GUIDE (STAND-BY) SERVICE
56
A-1898-330-A REAR CASE ASSY B SERVICE (BLACK)
56
A-1898-686-A REAR CASE ASSY W SERVICE (WHITE)
57
4-295-881-01
ENTER BUTTON B SERVICE (BLACK)
57
4-295-881-11
ENTER BUTTON W SERVICE (WHITE)
58
4-295-884-01
4 DIRECTION BUTTON B SERVICE
(b, v, B, V, MENU, BACK) (BLACK)
58
4-295-884-11
4 DIRECTION BUTTON W SERVICE
(b, v, B, V, MENU, BACK) (WHITE)
59
9-913-402-43
POLYIMIDE SHEET, t=0.075 (for SERVICE)
60
J-2501-274-A
FIRAMENT TAPE (12 mm) (T0.18 mm) (for SERVICE)
IR901
A-1843-090-A IR RECEIVER ASSY SERVICE
J602
4-141-818-01
SERVICE DC JACK (DC IN 5V
)
LCD901 A-1898-328-A LCD
ASSY
SERVICE
LP901
A-1843-091-A LOGO PIPE ASSY SERVICE
SP901 A-1843-089-A SPEAKER
ASSY
SERVICE
Note
Note1:
Follow the disassembly procedure in the numerical order given.
– Rear bottom view –
1 two tapping screws
(P2)
1 two tapping screws
(P2)
3 two claws
3 three claws
4 Remove all claws while rounding in outer.
3 three claws
3 three claws
5
6 front case assy
– Front bottom view –
JIG
When disassembling the set,
use the following jig.
Part No. 9-913-402-33 Tool for Disassembly
use the following jig.
Part No. 9-913-402-33 Tool for Disassembly
2 Insert the jig in the space between the front
cover and the rear cover assy and remove.
Note: Please spread a sheet under a
unit not to injure front panel.
Note2: Position where speaker assy (SP901)
is installed.
Match the ditch of the speaker
assy (SP901) to the rib of the
rear case.
assy (SP901) to the rib of the
rear case.
Note7: The mount parts other than DC jack
cannot exchange it alone. When the
mount parts other than DC jack are
defective, exchange the complete
mounted board.
mount parts other than DC jack are
defective, exchange the complete
mounted board.
Note3: How to install the MAIN board.
1 Insert two USB jacks
in the rear case.
MAIN board
2
Note4: Position where logo pipe assy (LP901)
is installed.
Match the ditch of the corner of the logo pipe
assy (LP901) tothe rib of the rear case.
assy (LP901) tothe rib of the rear case.
Note5: Please cut out and use POLYIMIDE
SHEET for a specified size when you
exchange it for new parts.
exchange it for new parts.
As for this part, the material or thickness
might be different compared with before.
might be different compared with before.
However, there is no obstacle at all.
50 mm
20 mm
Note6: Please cut out and use FIRAMENT
TAPE for a specified size when you
exchange it for new parts.
exchange it for new parts.
As for this part, the material
or thickness might be different
compared with before.
or thickness might be different
compared with before.
However, there is no obstacle at all.
30 mm
12 mm
Note8: When the MAIN board in this
unit is replaced, it is necessary
to set destination. Execute the
setting of destination referring to
“DESTINATION SETTING” (original
service manual page 6).
to set destination. Execute the
setting of destination referring to
“DESTINATION SETTING” (original
service manual page 6).
• Color Indication of Appearance Parts Ex-
ample:
KNOB, BALANCE (WHITE) . . . (RED)
Parts Color Cabinet’s Color
• Refer to “COLOR VARIATION” on page 2
on the original service manual about color
variation of model and destination.
variation of model and destination.
1. EXPLODED VIEW
1-1. DPF-HD800
LCD901
A
MAIN board
IR901
J602
53
53
54
55
57
58
53
LP901
(Note 4)
(Note 4)
SP901
(Note 2)
(Note 2)
51
(Note 1)
56
(Note 1)
52
(Note 3, 7, 8)
59
(Note 5)
60
(Note 6)
A
Display