Read Sony MPK-DVF5M Service Manual online
– 4 –
8
-GB
Preparation (continued)
For DCR-TRV40E/TRV50E
1
Attach the screw plate to
position 1 on shoe E so that the
catch on the reverse side of the
shoe clicks into place.
position 1 on shoe E so that the
catch on the reverse side of the
shoe clicks into place.
2
Fasten the screw of the screw
plate on shoe E to the tripod
screw hole of the camcorder and
tighten firmly.
plate on shoe E to the tripod
screw hole of the camcorder and
tighten firmly.
3
Attach the screw plate to
position 2 on shoe B.
position 2 on shoe B.
4
Fasten the screw of the screw
plate on the shoe B to the screw
hole on the shoe E of the
camcorder tightly.
plate on the shoe B to the screw
hole on the shoe E of the
camcorder tightly.
5
Connect the A/V cable of the
shoe to the camcorder’s
AUDIO/VIDEO jack.
shoe to the camcorder’s
AUDIO/VIDEO jack.
Camera mounting
shoe E
shoe E
Camera mounting
shoe B
shoe B
Screw plate
B
Installation
position
of the screw plate
on the camera
mounting shoe E
position
of the screw plate
on the camera
mounting shoe E
9
-GB
GB
For DCR-TRV16E/TRV18E/TRV24E/TRV25E/TRV27E/TRV116E/
TRV118E
TRV118E
Use camera mounting shoe B and E,
spacer C, and the screw plate.
1
spacer C, and the screw plate.
1
Attach the spacer C to shoe E.
Attach the screw plate to
position 2 on shoe E so that the
catch on the reverse side of the
shoe clicks into place.
Attach the screw plate to
position 2 on shoe E so that the
catch on the reverse side of the
shoe clicks into place.
2
Fasten the screw of the screw
plate on shoe E to the tripod
screw hole of the camcorder and
tighten firmly.
plate on shoe E to the tripod
screw hole of the camcorder and
tighten firmly.
3
Attach the screw plate to
position 2 on shoe B.
position 2 on shoe B.
4
Fasten the screw of the screw
plate on the shoe B to the screw
hole on the shoe E of the
camcorder tightly.
plate on the shoe B to the screw
hole on the shoe E of the
camcorder tightly.
5
Attach the screw plate to
position 2 on shoe B so that the
catch on the reverse side of the
shoe clicks into place.
position 2 on shoe B so that the
catch on the reverse side of the
shoe clicks into place.
6
Connect the A/V cable of the
shoe to the camcorder’s
AUDIO/VIDEO jack.
shoe to the camcorder’s
AUDIO/VIDEO jack.
Installation
position
of the screw plate
on the camera
mounting shoe B
position
of the screw plate
on the camera
mounting shoe B
Now you are ready to install the camcorder to the marine pack.
Be sure to check that the camera mounting shoe is attached to the camcorder
tightly before you install the camcorder to the marine pack.
Be sure to check that the camera mounting shoe is attached to the camcorder
tightly before you install the camcorder to the marine pack.
continued
3
Camera mounting
shoe B
shoe B
Screw plate
Spacer C
Camera mounting
shoe E
shoe E
Screw plate
10
-GB
Preparation (continued)
6
Prepare to record.
1
Set the POWER switch to CAMERA.
2
Set COMMANDER to ON in the menu settings.
3
Cancel the following functions: BACK LIGHT, NIGHTSHOT, PROGRAM AE,
flash and Picture effect.
flash and Picture effect.
4
Set the FOCUS switch to AUTO.
5
Set DISPLAY to V-OUT/LCD in the menu settings and press the DISPLAY
button on your camcorder before installing the marine pack.
button on your camcorder before installing the marine pack.
*
If your camcorder has REC LAMP in the menu settings, set it to OFF. By using
this function, the light of the lamp is not reflected in the lens. For details, please
refer to the operating instructions supplied with your camcorder.
this function, the light of the lamp is not reflected in the lens. For details, please
refer to the operating instructions supplied with your camcorder.
POWER
switch
switch
MENU button
FOCUS switch
11
-GB
GB
1
Remove the grip.
Undo the screw on the bottom side
of the marine pack.
of the marine pack.
2
Insert the lithium battery into the grip.
1
Remove the screw with the
supplied screw driver.
supplied screw driver.
2
Insert the supplied lithium
battery (CR2, × 1) with the
polarity positioned correctly as
indicated on the grip.
battery (CR2, × 1) with the
polarity positioned correctly as
indicated on the grip.
3
Fasten the screw tightly.
3
Unfasten the 3 latches and open
the marine pack.
the marine pack.
If you lift the metal part in the
direction of the finder when the
latches are open, the latches will
stop.
direction of the finder when the
latches are open, the latches will
stop.
Preparing the marine pack (installing the battery)
continued
Click on the first or last page to see other MPK-DVF5M service manuals if exist.